# Integrated turn signal mirrors

**URL:** <https://community.electricforum.com/t/integrated-turn-signal-mirrors/5138>\
**Category:** GEM Forum\
**Created:** [July 12, 2015, 6:45pm UTC](https://community.electricforum.com/t/integrated-turn-signal-mirrors/5138 "2015-07-12T18:45:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![uscgem](https://avatars.discourse-cdn.com/v4/letter/u/48db29/32.png) [@uscgem](https://community.electricforum.com/u/uscgem)\
**Post date:** [July 12, 2015, 6:45pm UTC](https://community.electricforum.com/t/integrated-turn-signal-mirrors/5138/1 "2015-07-12T18:45:11Z")

</div>

My 2008 didn’t come with mirrors so I installed these over the weekend. Took about an hour to run the wiring through the a pillar and to each front turn signal. Mirrors were $75 on eBay. Pic attached to show them in use.

---

<div class="post-metadata">

**Author:** ![Rascal](https://avatars.discourse-cdn.com/v4/letter/r/439d5e/32.png) [@Rascal](https://community.electricforum.com/u/Rascal)\
**Post date:** [July 12, 2015, 11:15pm UTC](https://community.electricforum.com/t/integrated-turn-signal-mirrors/5138/2 "2015-07-12T23:15:28Z")

</div>

Now, that’s neat…!