# In need of controller

**URL:** <https://community.electricforum.com/t/in-need-of-controller/18423>\
**Category:** GEM Forum\
**Created:** [April 1, 2020, 2:34am UTC](https://community.electricforum.com/t/in-need-of-controller/18423 "2020-04-01T02:34:00Z")\
**Posts on this page:** 15\
**Page:** 1

<div class="post-metadata">

**Author:** ![Nowhereguy](https://avatars.discourse-cdn.com/v4/letter/n/ecae2f/32.png) [@Nowhereguy](https://community.electricforum.com/u/Nowhereguy)\
**Post date:** [April 1, 2020, 2:34am UTC](https://community.electricforum.com/t/in-need-of-controller/18423/1 "2020-04-01T02:34:00Z")

</div>

I have a bad t3 controller. I tried one from another gem and works great so definItely the controller. Anyone have one for sale or know where I can get mine rebuilt? Or a t4 if that will work.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 2, 2020, 3:21pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/2 "2020-04-02T15:21:49Z")

</div>

FSIP will reman…

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [April 5, 2020, 5:02pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/3 "2020-04-05T17:02:50Z")

</div>

Mike KC has a T-4 for sale.  
If your car runs a T-3 you will need to do some  
Jumpers to make a T-4 work in a T-3 car

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [April 5, 2020, 7:39pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/4 "2020-04-05T19:39:29Z")

</div>

> [@Nowhereguy](#):
>
> I have a bad t3 controller. I tried one from another gem and works great so definItely the controller. Anyone have one for sale or know where I can get mine rebuilt? Or a t4 if that will work.

I have a known good T-4 if you are looking for one.

---

<div class="post-metadata">

**Author:** ![Nowhereguy](https://avatars.discourse-cdn.com/v4/letter/n/ecae2f/32.png) [@Nowhereguy](https://community.electricforum.com/u/Nowhereguy)\
**Post date:** [April 5, 2020, 9:38pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/5 "2020-04-05T21:38:07Z")

</div>

Do you know what jumpers I would need to do? I was going to send the t3 in to fsip for rebuilding. Do you think a t3 might be a better option?

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [April 5, 2020, 11:16pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/6 "2020-04-05T23:16:59Z")

</div>

Looks like a T3 and a T4 should plug right up? @Inwo  
A T-4 is more programable if you ever want to hotrod it.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/9/9da51ad667db78444ca29f5d376a716eb21af14f.png)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 5, 2020, 11:31pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/7 "2020-04-05T23:31:01Z")

</div>

It needs jumper added. Pin 13 is not shown in t4, but needed.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 6, 2020, 2:16pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/8 "2020-04-06T14:16:51Z")

</div>

Grant

I need the information on the jumpers to make a T4 work on a T3 car. I went through this twice and gave up. A lot of guys would like this information.

Rodney

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 6, 2020, 5:25pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/9 "2020-04-06T17:25:30Z")

</div>

> [@Swap T3 to a t4](https://community.electricforum.com/t/swap-t3-to-a-t4/17781/5):
>
> Hi  
> it connect pin13 from controller to -72v negative with a relay  
> and also fix so you can not drive with handbrake

As far as I know, only p13.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [April 6, 2020, 6:31pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/10 "2020-04-06T18:31:35Z")

</div>

Rodney: I do t know the specifics. I know the T-1 to T-2 conversion is well documented.  
But I have never done a T-3 to T-4 conversion.  
I know just like T-1 to T-2 conversion unless certain wires are jumped you are going anywhere

---

<div class="post-metadata">

**Author:** ![Nowhereguy](https://avatars.discourse-cdn.com/v4/letter/n/ecae2f/32.png) [@Nowhereguy](https://community.electricforum.com/u/Nowhereguy)\
**Post date:** [April 7, 2020, 2:17am UTC](https://community.electricforum.com/t/in-need-of-controller/18423/11 "2020-04-07T02:17:13Z")

</div>

I think I should probably play it safe and have mine rebuilt. Thanks guys

---

<div class="post-metadata">

**Author:** ![Gaslol](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@Gaslol](https://community.electricforum.com/u/Gaslol)\
**Post date:** [April 27, 2020, 1:55am UTC](https://community.electricforum.com/t/in-need-of-controller/18423/12 "2020-04-27T01:55:05Z")

</div>

How did the rebuild go? I just sent mine back for the 3rd time and I hope it comes back working…

---

<div class="post-metadata">

**Author:** ![Nowhereguy](https://avatars.discourse-cdn.com/v4/letter/n/ecae2f/32.png) [@Nowhereguy](https://community.electricforum.com/u/Nowhereguy)\
**Post date:** [April 27, 2020, 2:26am UTC](https://community.electricforum.com/t/in-need-of-controller/18423/13 "2020-04-27T02:26:22Z")

</div>

It seems to be working fine so far. Thanks for asking

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [April 27, 2020, 11:48am UTC](https://community.electricforum.com/t/in-need-of-controller/18423/14 "2020-04-27T11:48:22Z")

</div>

Gaslol . Did you send yours to FSIP or R4F ?

---

<div class="post-metadata">

**Author:** ![Gaslol](https://avatars.discourse-cdn.com/v4/letter/g/a587f6/32.png) [@Gaslol](https://community.electricforum.com/u/Gaslol)\
**Post date:** [April 27, 2020, 1:20pm UTC](https://community.electricforum.com/t/in-need-of-controller/18423/15 "2020-04-27T13:20:42Z")

</div>

R4F but I believe he just turns it into FSIP. I wasn’t aware you could go direct to FSIP.
