# I have 2 question

**URL:** <https://community.electricforum.com/t/i-have-2-question/12992>\
**Category:** GEM Forum\
**Created:** [November 4, 2017, 1:48pm UTC](https://community.electricforum.com/t/i-have-2-question/12992 "2017-11-04T13:48:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![quanghieuci](https://avatars.discourse-cdn.com/v4/letter/q/9dc877/32.png) [@quanghieuci](https://community.electricforum.com/u/quanghieuci)\
**Post date:** [November 4, 2017, 1:48pm UTC](https://community.electricforum.com/t/i-have-2-question/12992/1 "2017-11-04T13:48:26Z")

</div>

I have a 2002 E825 gem.This year when I brought it out from storage I started to have issues.When the ignition is turned off and the E brake is off the display board flashes all Zero’s or what ever level the batteries are at.If I apply the E brake 04 code comes on the display wih the red light on over the wrench.That would be a normal condition if the key was on.When I turn the key on the Gem appears to be normal.I know that this condition is taken charge of the batteries unless I hit the kill switch everytime I turn the key off.I would appreciate ANY advise on this

and the second question

Car has ride 4 fun motor and new gel batteries. Gearbox seems to be a little noisy and regenerative braking causes a high pinched squeal, but the most significant issue is a rhythmic surge when holding a constant speed. Cannot feel a surge during acceleration. Any guesses as to where to look first. Accelerator switch?, controller?, bearings? Constant velocity joints? Any help would be greatly appreciated.
