# How to change the direct current from 12V into 5V?

**URL:** <https://community.electricforum.com/t/how-to-change-the-direct-current-from-12v-into-5v/12296>\
**Category:** Battery & Chargers\
**Created:** [April 18, 2017, 1:12pm UTC](https://community.electricforum.com/t/how-to-change-the-direct-current-from-12v-into-5v/12296 "2017-04-18T13:12:14Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lemons](https://avatars.discourse-cdn.com/v4/letter/l/5f8ce5/32.png) [@lemons](https://community.electricforum.com/u/lemons)\
**Post date:** [April 18, 2017, 1:12pm UTC](https://community.electricforum.com/t/how-to-change-the-direct-current-from-12v-into-5v/12296/1 "2017-04-18T13:12:14Z")

</div>

Good afternoon~  
I would like to ask some advice from you.Please look at the following circuit:  
 ![](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/61ebbc99ff222e793f62e8e750b7243c0772fe9c.png)  
In this circuit, How to chose the capacitor in two ports of [7805](http://www.kynix.com/Parts/2369277/7805.html) if changing the direct current from 12V into 5V? The reason is I need to change the direct current of car battery from 12V into 5V which will be used by singleship. Do you have any specific formulas ?

Thanks all.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 18, 2017, 3:10pm UTC](https://community.electricforum.com/t/how-to-change-the-direct-current-from-12v-into-5v/12296/2 "2017-04-18T15:10:53Z")

</div>

Buy a lighter plug converter at Walmart

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 18, 2017, 3:44pm UTC](https://community.electricforum.com/t/how-to-change-the-direct-current-from-12v-into-5v/12296/3 "2017-04-18T15:44:19Z")

</div>

It’s covered in the 7805 data sheet. Not critical in most applications.  
A linear regulator has to dump a lot oh heat. How much current do you need?

.33uf C5 and .1uf C6 is a start  
C4 and C7 may not be needed at all. 10uf to 100uf won’t hurt.
