# Horn lights don't work

**URL:** https://community.electricforum.com/t/horn-lights-dont-work/5793
**Category:** GEM Forum
**Created:** [February 20, 2016, 6:08am UTC](https://community.electricforum.com/t/horn-lights-dont-work/5793 "2016-02-20T06:08:36Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Jsrrags](https://avatars.discourse-cdn.com/v4/letter/j/bc79bd/32.png) [@Jsrrags](https://community.electricforum.com/u/Jsrrags)
#### Post date: [February 20, 2016, 6:08am UTC](https://community.electricforum.com/t/horn-lights-dont-work/5793/1 "2016-02-20T06:08:36Z")

</div>

Hi,

Got in my Gem last night and out of nowhere the lights, heater, horn wouldn’t work. It runs and drives fine

It’s a 2004 E4.

Has the 72-12v converter gone bad?

Thanks,  
Jeff

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [February 20, 2016, 6:23am UTC](https://community.electricforum.com/t/horn-lights-dont-work/5793/2 "2016-02-20T06:23:47Z")

</div>

Could be - Check all fuses.

---

<div class="post-metadata">

### Author: ![Jsrrags](https://avatars.discourse-cdn.com/v4/letter/j/bc79bd/32.png) [@Jsrrags](https://community.electricforum.com/u/Jsrrags)
#### Post date: [February 20, 2016, 6:31am UTC](https://community.electricforum.com/t/horn-lights-dont-work/5793/3 "2016-02-20T06:31:29Z")

</div>

Is there one master fuse somewhere for the accessories? All the ones under the front hood are fine.

Jeff

---

<div class="post-metadata">

### Author: ![Jsrrags](https://avatars.discourse-cdn.com/v4/letter/j/bc79bd/32.png) [@Jsrrags](https://community.electricforum.com/u/Jsrrags)
#### Post date: [February 20, 2016, 8:25am UTC](https://community.electricforum.com/t/horn-lights-dont-work/5793/4 "2016-02-20T08:25:53Z")

</div>

Sorry guys, didn’t realize there were two fuses on the board and one of them was blown. Problem resolved, thanks

---

<div class="post-metadata">

### Author: ![bgeery](https://avatars.discourse-cdn.com/v4/letter/b/b5e925/32.png) [@bgeery](https://community.electricforum.com/u/bgeery)
#### Post date: [February 22, 2016, 11:21am UTC](https://community.electricforum.com/t/horn-lights-dont-work/5793/5 "2016-02-22T11:21:19Z")

</div>

I’ve blown one of those fuses just having the headlights and key switch on when I on when I engaged the main disconnect. It’s was probably the inrush current of the lights combined with the caps on the converter.
