# High Speed 9.3 Transmission coming soon

**URL:** <https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909>\
**Category:** GEM Forum\
**Created:** [February 19, 2023, 1:28am UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909 "2023-02-19T01:28:39Z")\
**Posts on this page:** 6\
**Page:** 8

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [February 25, 2023, 2:51pm UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909/144 "2023-02-25T14:51:22Z")

</div>

I don’t have a modern either - I only have the classic on gear end and modern on hub end.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 1, 2023, 7:40pm UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909/145 "2023-03-01T19:40:48Z")

</div>

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/af20e3a0acb8f2fb9c3f2566c7abe0bcc9ed7768.jpeg)

Correct solid shaft:  
“15.75” should be the length of the solid shaft spline end to spline end"

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [March 2, 2023, 2:41am UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909/146 "2023-03-02T02:41:28Z")

</div>

Trim gearbox is a a bit wider so if the Comex shaft is larger might be ok

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 2, 2023, 2:45am UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909/147 "2023-03-02T02:45:57Z")

</div>

The one shown is way to short obviously. You sending an oem shaft and measuring the team should be the last puzzle pieces.  
Grant could measure the team for me as well.

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [March 2, 2023, 2:49am UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909/148 "2023-03-02T02:49:13Z")

</div>

I’ve found 2 gearbox’s in the wrecked car but they are bad. I’m gonna see if I can make one out of 2 and I’ll send you the other one to play.

I think one of them has some missing input shaft teeth. And the other one some bearings.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 2, 2023, 3:01am UTC](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909/149 "2023-03-02T03:01:09Z")

</div>

The shaft width is all I really need, until I find something that fits.  
That is measured between the ends of output shafts.

[Previous page](https://community.electricforum.com/t/high-speed-9-3-transmission-coming-soon/25909.md?page=7)