# Help low speed cut out issue

**URL:** <https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072>\
**Category:** NEV & LSV Forum\
**Created:** [April 27, 2022, 2:23am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072 "2022-04-27T02:23:00Z")\
**Posts on this page:** 14\
**Page:** 2

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [April 28, 2022, 5:00pm UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/21 "2022-04-28T17:00:14Z")

</div>

(From Specs page:)  
Person quantity: two  
Dimensions (L x W x H): 2,295 x 1,330 x 1,720mm  
Wheelbase: 1,595mm  
Tread front/rear: 1,030/1,050mm  
Curb weight: 550kg  
Payload: 200kg  
Front/rear axle: F/R 270/480kg  
Minimum ground clearance: 130mm  
Minimum turning diameter: 5.6m  
Electric motor: separated excited DC motor  
Power: 3.1kW  
Rate voltage: 48V  
Rate current: 100A  
Rate torque: 8.28Nm  
Rate rotate speed: 3,600rpm  
Maximum speed: 40kph  
Maximum climbing angle: 8°  
Distance per charge: 60km

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [April 28, 2022, 6:08pm UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/22 "2022-04-28T18:08:31Z")

</div>

do you use Deep-Cycle or Starting AGM Batteries ?

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 28, 2022, 10:54pm UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/23 "2022-04-28T22:54:24Z")

</div>

![20220428_174847](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/8/828b783d892fe787d28a55de00baa40bb8d19be1.jpeg)  
Supposed to be a dual purpose battery.

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 28, 2022, 10:55pm UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/24 "2022-04-28T22:55:38Z")

</div>

Wow where did you find that info.

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 28, 2022, 11:00pm UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/25 "2022-04-28T23:00:35Z")

</div>

I know Autozone right. I refuse to work on anyone’s car that want me to put on Autozone parts. But they were the only place that had batteries cheap. This car is for resale. If it were mine it would have Trojans in it.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [April 29, 2022, 12:03am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/26 "2022-04-29T00:03:25Z")

</div>

> [@ibbbhead](#):
>
> Supposed to be a dual purpose battery

Yes, and one of those purposes is “ballast”

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 29, 2022, 12:39am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/27 "2022-04-29T00:39:24Z")

</div>

Spoken like a boater. I got some O’Riley 31 DCM’s that I’ll try and see if that does the trick.

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 30, 2022, 12:21am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/28 "2022-04-30T00:21:13Z")

</div>

![20220429_122349](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/9/9c8f0f747813af8977aaa6f49912bc779f8c85f9.jpeg)  
 ![20220429_122456](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/ac8263978d88b49056bf41d5745490c6c764a0a8.jpeg)  
 ![20220429_122521](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/043affcffe324f3ee99db03705359be28944f1cb.jpeg)  
Here are the pics of the controller. I swapped the batteries wit known good 31 DCM’s and it was the same 5.4 miles and down to 20 percent. I’ll check voltage before controller and after when I get a chance. Thanks for the help.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [April 30, 2022, 1:30am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/29 "2022-04-30T01:30:19Z")

</div>

Have you checked for dragging brakes? That will murder the range in a hurry.

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 30, 2022, 2:31am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/30 "2022-04-30T02:31:46Z")

</div>

Ya I can roll it with two fingers.

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [April 30, 2022, 2:35am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/31 "2022-04-30T02:35:39Z")

</div>

Thanks for all the help. I loved your ballast comment.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [April 30, 2022, 6:49am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/32 "2022-04-30T06:49:32Z")

</div>

> [@ibbbhead](#):
>
> Ya I can roll it with two fingers

Very impressive. I can’t roll it with seven fingers; three on the left and four on the right.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [April 30, 2022, 11:37am UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/33 "2022-04-30T11:37:06Z")

</div>

> I swapped the batteries wit known good 31 DCM’s

Yes- check the voltages. Depending on how that car is calculating SOC it may not be very accurate. It is probably a Voltage based display and it probably dips real bad on accel. Measure your batteries at rest, and again as you are driving around. I bet those batteries all dip real bad.

![12v battery SOC%](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/648b348aa7812207ce56aa6e2d40302f4b00ab49.jpeg)

Check all connections. They all need to be real clean. Resistance = heat. Your electrons are blowing off your car with the wind.

Possibly that’s all you are going to get out of this car.

I keep forgetting that this is a 48v system and dealing with all golf cart components. They might have had to crank up the amps to get that 3.1 motor to push this cart around. Lower voltage requires more amps to do the same work and doing it with 2/3 the capacity (4 of 6 batteries).

Depending on what you will be doing with this cart, Perhaps an upgrade is in order?  
Get rid of the lead and go lithium. This will give you a stable power pack and shed at least a couple hundred pounds of lead.

If you really want to go hotrod - Rewire that thing for 72v lithium, put in a better motor and controller.

---

<div class="post-metadata">

**Author:** ![ibbbhead](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ibbbhead/32/14293_2.png) [@ibbbhead](https://community.electricforum.com/u/ibbbhead)\
**Post date:** [May 2, 2022, 12:50pm UTC](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072/34 "2022-05-02T12:50:19Z")

</div>

Thanks,I’ll check the voltages this week. Can’t put a lot of money into it because it’s for resale. But that would be a fun car with 72 volts.

[Previous page](https://community.electricforum.com/t/help-low-speed-cut-out-issue/24072.md?page=1)
