# Hello everyone 2001/2002 help needed **URL:** \ **Category:** GEM Forum\ **Created:** [March 10, 2019, 5:41pm UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598 "2019-03-10T17:41:24Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Dirtman](https://avatars.discourse-cdn.com/v4/letter/d/bbe5ce/32.png) [@Dirtman](https://community.electricforum.com/u/Dirtman)\ **Post date:** [March 10, 2019, 5:41pm UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598/1 "2019-03-10T17:41:24Z")
So I am a new Gem owner 2001 T-1 and 3.5 motor the car is in pretty good condition.I have read a lot here and have talked with some others about what are the better pieces and parts. So I found a 2002 with some of the parts I was looking for. To me it is just a parts car nothing more.T-2 and 5 hp motor are my main items that I am wanting. This brings me to everyone I now there are ways to convert the t-2 to my car what I need help with is the steps and wiring schematics, was also wondering if I can put the 5 hp in my car?, pretty sure I can. Any help would be very appreciated Thanks Todd ---
**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\ **Post date:** [March 11, 2019, 12:22am UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598/2 "2019-03-11T00:22:56Z")
I have done the conversion and I even document hear. Check out T-1 to T-2 Swap out ---
**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\ **Post date:** [March 11, 2019, 12:26am UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598/3 "2019-03-11T00:26:18Z")
Here > [@T-1 to T-2 swap out](https://community.electricforum.com/t/t-1-to-t-2-swap-out/4137/11): > > The parts you need are on this page [http://gemcarpartsdirect-px.rtrk.com/images/partscatalog/2002-2004PartsCatalog.pdf#page=52](http://gemcarpartsdirect-px.rtrk.com/images/partscatalog/2002-2004PartsCatalog.pdf#page=52) you will need 2 of these 0106-00827 ASSY,WIRE - SPLIT HEAT SINK JUMPER and One of these 0106-00678 ASSY, WIRE HARNESS - SPLIT HEATSINK JUMPER ---
**Author:** ![Dirtman](https://avatars.discourse-cdn.com/v4/letter/d/bbe5ce/32.png) [@Dirtman](https://community.electricforum.com/u/Dirtman)\ **Post date:** [March 11, 2019, 12:43am UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598/4 "2019-03-11T00:43:23Z")
Ok so I click on the link and it seems to take me to a reach local website?. I also have the wiring harness from the other car I got the controller from, so can I use any of that harness? ---
**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\ **Post date:** [March 11, 2019, 11:44am UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598/5 "2019-03-11T11:44:16Z")
Sorry I know it’s confusing. Click the link at the Top of my post that says. **T-1 to T-2 Swap out**. Your clicking on the link in the center of the post. Sorry I don’t know why that confusing add got included when I pasted it. \*\*T-1 to T-2 swap out \*\* ---
**Author:** ![Dirtman](https://avatars.discourse-cdn.com/v4/letter/d/bbe5ce/32.png) [@Dirtman](https://community.electricforum.com/u/Dirtman)\ **Post date:** [March 11, 2019, 11:01pm UTC](https://community.electricforum.com/t/hello-everyone-2001-2002-help-needed/15598/6 "2019-03-11T23:01:04Z")
Sorry about being kinda of stupid here I am confused about where the jumpers go. I think what you are saying is jumper the changed #23 wire to #21 so there will be Two wires on #21 then the other end of 21 jumper goes to #2 But you say I need 2 jumpers so what I am thinking can’t be right still confused! I also have the harness for the 2002 car I bought for parts guessing I can use most of that and should not need to buy anything correct. I also can not see any pictures. Pretty new to the site maybe I don’t have that level of clearance.