# Half shafts

**URL:** <https://community.electricforum.com/t/half-shafts/3098>\
**Category:** GEM Forum\
**Created:** [February 12, 2013, 11:51am UTC](https://community.electricforum.com/t/half-shafts/3098 "2013-02-12T11:51:32Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![acker1](https://avatars.discourse-cdn.com/v4/letter/a/d78d45/32.png) [@acker1](https://community.electricforum.com/u/acker1)\
**Post date:** [February 12, 2013, 11:51am UTC](https://community.electricforum.com/t/half-shafts/3098/1 "2013-02-12T11:51:32Z")

</div>

2008 GEM Model: EL  
I’m back volunteering at the Fl state park I was at last year. They have the power problem fixed that I posted last year. NOW-- the half shafts act like a bad universal joint. Are they universal joints? Can they be replaced? Or do you have to replace the half shafts themselves? Where can we buy the parts at a reasonable price? (Park has a limited budget!)  
Thanks  
DICK

---

<div class="post-metadata">

**Author:** ![LuvMyTJ](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/luvmytj/32/537_2.png) [@LuvMyTJ](https://community.electricforum.com/u/LuvMyTJ)\
**Post date:** [February 12, 2013, 7:17pm UTC](https://community.electricforum.com/t/half-shafts/3098/2 "2013-02-12T19:17:32Z")

</div>

There are two members here who may be able to help you out. Marlon or Daniel are great resources for all things Gem. 🙂

Other than that you can search the web. There are a few vendors who have the newer shafts. Be prepared for the $150 -$200 range each. Depending on the price new, you may want to consider taking them to your local driveline repair shop.

---

<div class="post-metadata">

**Author:** ![acker1](https://avatars.discourse-cdn.com/v4/letter/a/d78d45/32.png) [@acker1](https://community.electricforum.com/u/acker1)\
**Post date:** [February 12, 2013, 10:42pm UTC](https://community.electricforum.com/t/half-shafts/3098/3 "2013-02-12T22:42:11Z")

</div>

Thanks for the reply. Do you think the problem is the u-joints on the shafts? i think that is what a driveline repair shop would replace. As you can tell, I’m not too familiar with GEM cars.

I watch this post to see if those 2 people respond.

Thanks again,  
DICK

---

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [February 13, 2013, 5:47am UTC](https://community.electricforum.com/t/half-shafts/3098/4 "2013-02-13T05:47:02Z")

</div>

They are not universal joints. Instead, these are called constant velocity joints. 2004 and prior are different than 2005 and newer. At $125, NEV accessories has the best price for the 2004 and prior. Not difficult to install.

Daniel

---

<div class="post-metadata">

**Author:** ![LuvMyTJ](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/luvmytj/32/537_2.png) [@LuvMyTJ](https://community.electricforum.com/u/LuvMyTJ)\
**Post date:** [February 13, 2013, 6:04am UTC](https://community.electricforum.com/t/half-shafts/3098/5 "2013-02-13T06:04:24Z")

</div>

[QUOTE=GEMmechanic;14072]They are not universal joints. Instead, these are called constant velocity joints. 2004 and prior are different than 2005 and newer. At $125, NEV accessories has the best price for the 2004 and prior. Not difficult to install.

Daniel[/QUOTE]

The 2008 shafts seem to be a bit harder to find than the 2004 and down.

And yes, driveline repair shops will replace the CV joint on your existing shafts if you were to take them there.

---

<div class="post-metadata">

**Author:** ![acker1](https://avatars.discourse-cdn.com/v4/letter/a/d78d45/32.png) [@acker1](https://community.electricforum.com/u/acker1)\
**Post date:** [February 13, 2013, 6:04pm UTC](https://community.electricforum.com/t/half-shafts/3098/6 "2013-02-13T18:04:53Z")

</div>

Thanks, I’ll check one out tomorrow. Hopefully they are an authorized vendor for the state.

DICK

---

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [October 24, 2013, 2:24pm UTC](https://community.electricforum.com/t/half-shafts/3098/7 "2013-10-24T14:24:02Z")

</div>

The boots are available, but hardly worth the messy job. A special tool, KD # 3191, is needed to squeeze the new clamps onto the new boot. I buy our shafts from NEV Accessories.

Daniel
