# George is on the move **URL:** \ **Category:** Uncategorized\ **Created:** [September 6, 2022, 2:11pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064 "2022-09-06T14:11:52Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 6, 2022, 2:11pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/1 "2022-09-06T14:11:52Z")
South Ca. and possibly up to @ScottyD . Battery to Ernie? Too full to deliver a roller from here. Room in bed for motors, batteries, etc. @ScottyD need the rest of my cells? Whant to send some 22s modules back or are they selling? If George needs a cheap back haul I may buy a car from you. @MikeKC May or may not by hitting Kc. Ask him. North Ca. would need a big load for George this trip, I think. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 6, 2022, 2:15pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/2 "2022-09-06T14:15:36Z")
@djgabriel2004 ask about bringing some 6 pass gems this far for storage. He is picking up a car for me in cent Iowa. Don’t know about Mi. Worth asking as Troy is returning from East coast tomorrow. @GHTransport ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [September 6, 2022, 2:53pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/3 "2022-09-06T14:53:21Z")
Timing? If not a complete roller, How about a rear axle? ← room for? (Talking Backwards I am, Like Yoda.) ---
**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\ **Post date:** [September 6, 2022, 3:42pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/4 "2022-09-06T15:42:57Z")
Yeah Michigan to your house Troy is not available I think George cant do it either ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 6, 2022, 7:39pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/5 "2022-09-06T19:39:30Z")
> [@AssyRequired](#): > > If not a complete roller, How about a rear axle? ← room for? I do have a 1/2 roller that I can pull the rear out of. I actually just stole the drums off of it as the one I built had them missing. afaik the rest will have drums. I can keep shuffling parts as long as they last. It’s nice working with new clean parts. ---
**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\ **Post date:** [September 7, 2022, 5:34am UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/6 "2022-09-07T05:34:37Z")
Trading texts with @GHTransport to get that battery out here. Going throw him some $$ to cover the cost to make it down to SD. What motors are available? I want in on the 10/12kw AC motors. @KevinUpHills is willing to let us experiment with his car when we do the Goliath install. @Inwo any chance you want to throw on some of the wheel wells you have? @MikeKC and I were thinking about trying to install them in the rear on @KevinUpHills install. ---
**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\ **Post date:** [September 7, 2022, 5:45am UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/7 "2022-09-07T05:45:09Z")
@Nic good time to get some cells sent out for your Think ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 7, 2022, 3:18pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/8 "2022-09-07T15:18:40Z")
> [@Erniea15](#): > > wheel wells you have? I’ll send a pair for future use. They only fit 20" tall tires. Maybe it’s a start. Make a list. All I have here are a couple pmac motors, but would like to get them tested on a Gem. For full power need a S6. They can pull 450 amps. S4 is fine with slight detuning. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 7, 2022, 3:19pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/9 "2022-09-07T15:19:45Z")
I have lots of cells and 22s modules. I pay $200 towards shipping each module with George, ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [September 7, 2022, 3:34pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/10 "2022-09-07T15:34:57Z")
Did you have the smaller size pmacs? Or just the monster? ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 7, 2022, 4:03pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/11 "2022-09-07T16:03:12Z")
Both but they are same frame size. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 10, 2022, 2:46am UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/12 "2022-09-10T02:46:24Z")
Too late for this trip. I have a bad penny sdi module come back. First one, sample, was sold to Nj. Client. It had two low cells right out of the box. After a few months running same two cells were problematic. I replaced complete module for him and sold the repaired 20s to a client in Fl. Battery worked fine. Car was sold to a new owner in Mi. Balance leads came loose during shipping and car was brought here to Mn. For repair. Long story ! ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 10, 2022, 2:54am UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/13 "2022-09-10T02:54:14Z")
New owner thought it best to buy a new 22s sdi after learning the history. One of the previous owners stripped out the m8 bolts by forcing 5/16 sae. Now I’m stuck with it again. Complete with jk-bms plug and play. Good battery with bad history. I’m into it for about 1/2 price $1500. It needs to go to someone able to break the curse. Other than bms shutting down from open balance leads everything should be fine. Never went dead and is balanced. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 12, 2022, 11:50am UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/14 "2022-09-12T11:50:17Z")
Today or tomorrow, Ernie’s. ---
**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\ **Post date:** [September 13, 2022, 9:22pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/15 "2022-09-13T21:22:03Z")
Christmas came early! ![PXL_20220913_210029703](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/8/85f201332c43c7440c4105d94362688ce6a9e8d0.jpeg) ---
**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\ **Post date:** [September 14, 2022, 12:54am UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/16 "2022-09-14T00:54:16Z")
Oh please, please, please be something from France. ![d0c05936ac2d472e987091b18db796c0](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d210da82a3f0872491e0a6c88fba4dc3baefe44f.jpeg) ---
**Author:** ![Nic](https://avatars.discourse-cdn.com/v4/letter/n/45deac/32.png) [@Nic](https://community.electricforum.com/u/Nic)\ **Post date:** [September 16, 2022, 2:15pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/17 "2022-09-16T14:15:12Z")
Sorry I missed this. I am assuming he has already left? If not please count me in. ---
**Author:** ![Nic](https://avatars.discourse-cdn.com/v4/letter/n/45deac/32.png) [@Nic](https://community.electricforum.com/u/Nic)\ **Post date:** [September 16, 2022, 2:21pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/18 "2022-09-16T14:21:55Z")
I’m always ready to take on a curse! Especially to save a few bucks! Just to confirm, everything is fine with this pack now? Except the bad bolt hole? ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 16, 2022, 3:12pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/19 "2022-09-16T15:12:41Z")
> [@Nic](#): > > everything is fine with this pack now? Yes, far as I know. I may just fix it up or use it myself. Ask next time George is going your way. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [September 17, 2022, 12:24pm UTC](https://community.electricforum.com/t/george-is-on-the-move/25064/20 "2022-09-17T12:24:11Z")
No members in my neck of the woods. Just fyi. Trailer going from Se. Mn. to Twin Cities area today. Return trip later today or tomorrow. [Next page](https://community.electricforum.com/t/george-is-on-the-move/25064.md?page=2)