# GEM T2 replacement

**URL:** <https://community.electricforum.com/t/gem-t2-replacement/24405>\
**Category:** GEM Forum\
**Created:** [June 7, 2022, 3:01pm UTC](https://community.electricforum.com/t/gem-t2-replacement/24405 "2022-06-07T15:01:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![davengl](https://avatars.discourse-cdn.com/v4/letter/d/b77776/32.png) [@davengl](https://community.electricforum.com/u/davengl)\
**Post date:** [June 7, 2022, 3:01pm UTC](https://community.electricforum.com/t/gem-t2-replacement/24405/1 "2022-06-07T15:01:56Z")

</div>

I need a T2 controller replacement. I found a 2002 Ford Controller Rev 1. will it work???

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 7, 2022, 6:29pm UTC](https://community.electricforum.com/t/gem-t2-replacement/24405/2 "2022-06-07T18:29:03Z")

</div>

I believe the T2 from the Ford Think has either different firmware or the parameters are stored in different registers, if it even has all the same ones . Note, this was told to me by a think guy who bought my T2 programming cables, I have not confirmed this information.

@David_Illingworth is the Ford Think expert here, maybe he can shed some light

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [June 7, 2022, 10:45pm UTC](https://community.electricforum.com/t/gem-t2-replacement/24405/3 "2022-06-07T22:45:43Z")

</div>

I’ve never tried it, but I have read more than once that it will not work.