# GEM Parking Brake

**URL:** <https://community.electricforum.com/t/gem-parking-brake/6321>\
**Category:** GEM Forum\
**Created:** [August 29, 2016, 10:35am UTC](https://community.electricforum.com/t/gem-parking-brake/6321 "2016-08-29T10:35:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rharvey](https://avatars.discourse-cdn.com/v4/letter/r/ec9cab/32.png) [@rharvey](https://community.electricforum.com/u/rharvey)\
**Post date:** [August 29, 2016, 10:35am UTC](https://community.electricforum.com/t/gem-parking-brake/6321/1 "2016-08-29T10:35:45Z")

</div>

I have a 2011 GEM E4, When I disengage the parking brake the warning light does not go off and the vehicle will not move. IS there a relay or sensor that could have gone bad

---

<div class="post-metadata">

**Author:** ![P51D](https://avatars.discourse-cdn.com/v4/letter/p/e99b99/32.png) [@P51D](https://community.electricforum.com/u/P51D)\
**Post date:** [August 29, 2016, 3:49pm UTC](https://community.electricforum.com/t/gem-parking-brake/6321/2 "2016-08-29T15:49:19Z")

</div>

> [@rharvey;32350](#):
>
> I have a 2011 GEM E4, When I disengage the parking brake the warning light does not go off and the vehicle will not move. IS there a relay or sensor that could have gone bad

Lift the seat and you will see a small switch on the brake handle mounting that is activated when the brake is released, this allows completion of the circuit . It might just be loose or need the position adjusted . Check it by closing the spring for contact. Switches are for sale on Ebay for 10/12 $$.
