# Gem no power screen black

**URL:** <https://community.electricforum.com/t/gem-no-power-screen-black/6462>\
**Category:** GEM Forum\
**Created:** [November 4, 2016, 3:12am UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462 "2016-11-04T03:12:34Z")\
**Posts on this page:** 16\
**Page:** 1

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 4, 2016, 3:12am UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/1 "2016-11-04T03:12:34Z")

</div>

I am new to gem car I just purchased a 2014 Polaris GEM E4 and it has no power to the screen, when I turn the key on nothing happens. the charger doesn’t display any of the LED Lights as well. I charged the batteries one by one with automotive charger I know have 73V to the PSDM I checked all fuses in the PSDM and the master power switch is on. If anyone has any ideas let me know I don’t really know where to start, I have tried a few things in the service manual, does anyone know what common problems would cause this.

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [November 4, 2016, 12:08pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/2 "2016-11-04T12:08:46Z")

</div>

Hi  
do you have 12volt on spade 6 on psdm ?  
do you have sound then release park brake ?

on 2014 think you have DC/DC built inside charger

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 4, 2016, 4:15pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/3 "2016-11-04T16:15:16Z")

</div>

Start at the top of the troubleshooting tree in the service manual.

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 5, 2016, 9:30am UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/4 "2016-11-05T09:30:24Z")

</div>

[quote=Gem e2;33413]Hi  
do you have 12volt on spade 6 on psdm ?  
do you have sound then release park brake ?

on 2014 think you have DC/DC built inside charger[/quote]

Ok I used a multi meter an set to D.C. And grounded on the neg post on the psdm and checked every fuse I have .105v on all fuses I have no sounds at any time I jumped out the parking break wires and still no noise

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 5, 2016, 9:32am UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/5 "2016-11-05T09:32:47Z")

</div>

> [@OLD HOUSEBOATER;33416](#):
>
> Start at the top of the troubleshooting tree in the service manual.

The service manual gets complex real quick it starts talking about checking voltage on pin a or b on wireingharnesses and I am not familiar with which harness is what

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 5, 2016, 2:47pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/6 "2016-11-05T14:47:04Z")

</div>

[quote=Gem e2;33413]Hi  
do you have 12volt on spade 6 on psdm ?  
do you have sound then release park brake ?

on 2014 think you have DC/DC built inside charger[/quote]

And yes I believe the charger has the D.C. D.C. Converter it’s the ique brand. I’ve heard there is a way to bypass the charger with the interlock I would like to try it to rule out the charger I’m thinking it is shot it does nothing no led lights come on at all I charged the batteries individually

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 5, 2016, 3:35pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/7 "2016-11-05T15:35:31Z")

</div>

Under the dash is the Geen wire from charger. It should have 72vdc on it measured from B-.

The 72v comes from the charger to power the key circuits.  
It goes away when charger is connected to AC.

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 5, 2016, 4:06pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/8 "2016-11-05T16:06:58Z")

</div>

[quote=Inwo;33434]Under the dash is the Geen wire from charger. It should have 72vdc on it measured from B-.

The 72v comes from the charger to power the key circuits.  
It goes away when charger is connected to AC.[/quote]

Yes I know that wire it has a tag on it that says do not ground. Is there a way to bypass the interlock? Also could my D.C. D.C. Converter be bad and causing me not to get 12v to my fuses?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 5, 2016, 4:23pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/9 "2016-11-05T16:23:25Z")

</div>

What did you have on the green?

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 5, 2016, 4:30pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/10 "2016-11-05T16:30:10Z")

</div>

> [@Inwo;33436](#):
>
> What did you have on the green?

I will check in the morning. What is the B- and where is that?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 5, 2016, 4:37pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/11 "2016-11-05T16:37:35Z")

</div>

Battery neg. either at battery or controller.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 5, 2016, 4:43pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/12 "2016-11-05T16:43:54Z")

</div>

B- is Battery negative B+ is Battery positive

Rodney

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 5, 2016, 4:45pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/13 "2016-11-05T16:45:49Z")

</div>

[quote=OLD HOUSEBOATER;33439]B- is Battery negative B+ is Battery positive

Rodney[/quote]

My bad yea I will try in the morning an let ya know

---

<div class="post-metadata">

**Author:** ![montemichini](https://avatars.discourse-cdn.com/v4/letter/m/51bf81/32.png) [@montemichini](https://community.electricforum.com/u/montemichini)\
**Post date:** [November 6, 2016, 7:15am UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/14 "2016-11-06T07:15:55Z")

</div>

[quote=OLD HOUSEBOATER;33439]B- is Battery negative B+ is Battery positive

Rodney[/quote]

Ok so I checked the green wire and I only get 1.50 volts between it and ground

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 6, 2016, 3:10pm UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/15 "2016-11-06T15:10:00Z")

</div>

You mean to B-? Not the same as ground!

If no voltage at green. Charger is not connected to B+ or charger is bad.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [November 7, 2016, 3:03am UTC](https://community.electricforum.com/t/gem-no-power-screen-black/6462/16 "2016-11-07T03:03:59Z")

</div>

On GEM carts battery minus is not connected to ground (frame)
