# Gem lee
**URL:** https://community.electricforum.com/t/gem-lee/6329
**Category:** GEM Forum
**Created:** [September 3, 2016, 2:31pm UTC](https://community.electricforum.com/t/gem-lee/6329 "2016-09-03T14:31:22Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@ca6772738758](https://community.electricforum.com/u/ca6772738758)
#### Post date: [September 3, 2016, 2:31pm UTC](https://community.electricforum.com/t/gem-lee/6329/1 "2016-09-03T14:31:22Z")
I have a question or two i recently replaced a zivan charger that was replaced was org a schotts with a quick charger which is working great and i jumped the red to green wire and all lights and everything works take it for a drive and get code 41 now when i first got it the person who i got it from said it was plug in next to a ref/freezer combo and the charge stop could it have burnt the controller
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 3, 2016, 2:47pm UTC](https://community.electricforum.com/t/gem-lee/6329/2 "2016-09-03T14:47:50Z")
I doubt anything with charger could damage control.
Does it run again when it cools off?
---
### Author:  [@ca6772738758](https://community.electricforum.com/u/ca6772738758)
#### Post date: [September 3, 2016, 3:33pm UTC](https://community.electricforum.com/t/gem-lee/6329/3 "2016-09-03T15:33:04Z")
Actually it keeps running just shows 41 now and then but i tried turn switch and put into n on dash turned switch back on i guest a cold hard start ??? Looks like maybe reset ??drove it down to about 60 and now i am charging it again did it reset the controller ACTUALLY TURNED OFF MAIN SWITCH NOT KEY SWITCH
---
### Author:  [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 3, 2016, 3:41pm UTC](https://community.electricforum.com/t/gem-lee/6329/4 "2016-09-03T15:41:10Z")
Yes, power off resets codes.
41 is over temp.
“Shorted thermal protector (TP) or
transistor over temperature”
---
### Author:  [@ca6772738758](https://community.electricforum.com/u/ca6772738758)
#### Post date: [September 3, 2016, 3:49pm UTC](https://community.electricforum.com/t/gem-lee/6329/5 "2016-09-03T15:49:42Z")
so am i looking for controller problem or to low off air press in over size tires brakes dragging ???
---
### Author:  [@ca6772738758](https://community.electricforum.com/u/ca6772738758)
#### Post date: [September 3, 2016, 3:53pm UTC](https://community.electricforum.com/t/gem-lee/6329/6 "2016-09-03T15:53:43Z")
also when i replaced the charger i ws told to connect the red to green wire which was plug into zivan and then i put the neg to controller neg and red to fuse side hot that shoulnt do this ???