# GEM front end alignment 

**URL:** <https://community.electricforum.com/t/gem-front-end-alignment/15175>\
**Category:** Uncategorized\
**Created:** [January 2, 2019, 3:35am UTC](https://community.electricforum.com/t/gem-front-end-alignment/15175 "2019-01-02T03:35:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jellybean](https://avatars.discourse-cdn.com/v4/letter/j/85f322/32.png) [@Jellybean](https://community.electricforum.com/u/Jellybean)\
**Post date:** [January 2, 2019, 3:35am UTC](https://community.electricforum.com/t/gem-front-end-alignment/15175/1 "2019-01-02T03:35:22Z")

</div>

Looking for a shop manual that shows me how. I’m located in the Tampa area and the only dealer won’t service them.

---

<div class="post-metadata">

**Author:** ![jeff95519](https://avatars.discourse-cdn.com/v4/letter/j/ea666f/32.png) [@jeff95519](https://community.electricforum.com/u/jeff95519)\
**Post date:** [January 3, 2019, 8:15pm UTC](https://community.electricforum.com/t/gem-front-end-alignment/15175/2 "2019-01-03T20:15:28Z")

</div>

The only thing to adjust is toe. Rule of thumb is 1/8 toe in

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [January 4, 2019, 12:30am UTC](https://community.electricforum.com/t/gem-front-end-alignment/15175/3 "2019-01-04T00:30:21Z")

</div>

You adjust camber by putting shims (washers) between the backing plate and spindle.

email me for manual. specify year

[rodneyadiehl@aol.com](mailto:rodneyadiehl@aol.com)