# Gem EZ Steer **URL:** \ **Category:** Buy, Sell, & Trade\ **Created:** [January 28, 2015, 2:31pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742 "2015-01-28T14:31:44Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [January 28, 2015, 2:31pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/1 "2015-01-28T14:31:44Z")
EZ Steer conversion for your 99 to 04 GEM. 50% reduction in effort. Requires drilling of 3 holes and trimming of Binacle Shroud. See Picture. $450 Exchange Plus $30 shipping. ---
**Author:** ![quangkaka95](https://avatars.discourse-cdn.com/v4/letter/q/d07c76/32.png) [@quangkaka95](https://community.electricforum.com/u/quangkaka95)\ **Post date:** [January 28, 2015, 9:35pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/2 "2015-01-28T21:35:03Z")
wow :)) wow :)) wow :)) ---
**Author:** ![quangkaka95](https://avatars.discourse-cdn.com/v4/letter/q/d07c76/32.png) [@quangkaka95](https://community.electricforum.com/u/quangkaka95)\ **Post date:** [January 28, 2015, 9:35pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/3 "2015-01-28T21:35:36Z")
love \<3 love \<3 love \<3 love \<3 love \<3 ---
**Author:** ![DonnieInNC](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/donnieinnc/32/553_2.png) [@DonnieInNC](https://community.electricforum.com/u/DonnieInNC)\ **Post date:** [July 4, 2015, 11:03am UTC](https://community.electricforum.com/t/gem-ez-steer/4742/4 "2015-07-04T11:03:59Z")
Hey Rodney, I don’t understand what is being done to the replacement unit to make it turn easier? My wheel is a little tuff to turn and nice and tight down to the wheels. My friends is real easy but he has a 1/4 turn slop in it. I could never go for that much play in the steering. What’s the difference between the stock unit and yours? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [July 4, 2015, 12:20pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/5 "2015-07-04T12:20:33Z")
2 to 1 reduction gearbox. Your friends cart is probably 2005 or newer. He also needs to tighten the clamp bolt on the steering shaft on the steering box end. ---
**Author:** ![DonnieInNC](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/donnieinnc/32/553_2.png) [@DonnieInNC](https://community.electricforum.com/u/DonnieInNC)\ **Post date:** [July 12, 2015, 12:40am UTC](https://community.electricforum.com/t/gem-ez-steer/4742/6 "2015-07-12T00:40:58Z")
Ok, now I understand. Thanks. ---
**Author:** ![tylaughter](https://avatars.discourse-cdn.com/v4/letter/t/839c29/32.png) [@tylaughter](https://community.electricforum.com/u/tylaughter)\ **Post date:** [June 16, 2016, 8:06pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/7 "2016-06-16T20:06:58Z")
Still for sale? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [June 18, 2016, 5:27pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/8 "2016-06-18T17:27:13Z")
I have one Rodney ---
**Author:** ![Nrapp33](https://avatars.discourse-cdn.com/v4/letter/n/eb8c5e/32.png) [@Nrapp33](https://community.electricforum.com/u/Nrapp33)\ **Post date:** [February 15, 2017, 5:21pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/9 "2017-02-15T17:21:47Z")
Do you have these for an 05 e4? The stock steering is tough on my wife to turn at low speed. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [February 15, 2017, 6:07pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/10 "2017-02-15T18:07:19Z")
Not at present. I’m in the midst of moving and getting married. Probably in the fall Rodney ---
**Author:** ![Nrapp33](https://avatars.discourse-cdn.com/v4/letter/n/eb8c5e/32.png) [@Nrapp33](https://community.electricforum.com/u/Nrapp33)\ **Post date:** [February 15, 2017, 10:03pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/11 "2017-02-15T22:03:08Z")
Ok sounds good. I’ll touch base then ---
**Author:** ![Kris](https://avatars.discourse-cdn.com/v4/letter/k/82dd89/32.png) [@Kris](https://community.electricforum.com/u/Kris)\ **Post date:** [March 1, 2017, 3:39am UTC](https://community.electricforum.com/t/gem-ez-steer/4742/12 "2017-03-01T03:39:13Z")
Hello all! I’m new to the forum and am looking forward to knowing more about my new Gem. I bought a 2002 Gem four seeter today and it need a new steering gear/rack. The one that is in it has broken into pieces. How much would this steering gear be with out a good exchange one? Or does anyone know where I could buy a good used one? I know I can buy a new one but I’m trying to save some money. Thank you-Kris ---
**Author:** ![Spibill](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@Spibill](https://community.electricforum.com/u/Spibill)\ **Post date:** [December 2, 2019, 2:36am UTC](https://community.electricforum.com/t/gem-ez-steer/4742/13 "2019-12-02T02:36:55Z")
I have a 2001 GEM that is very hard to steer at low speeds. Do you still sell these ? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [December 2, 2019, 3:11pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/14 "2019-12-02T15:11:00Z")
Started making them Aug 2020 In a message dated 12/1/2019 9:46:58 PM Eastern Standard Time, [electricforum@discoursemail.com](mailto:electricforum@discoursemail.com) writes: ---
**Author:** ![Spibill](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@Spibill](https://community.electricforum.com/u/Spibill)\ **Post date:** [December 2, 2019, 6:37pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/15 "2019-12-02T18:37:48Z")
Thanks for the reply. I’m going to try a “quick steer” 2:1 but use it in reverse so it should give me a 50% reduction in effort. ---
**Author:** ![JohnS](https://avatars.discourse-cdn.com/v4/letter/j/87869e/32.png) [@JohnS](https://community.electricforum.com/u/JohnS)\ **Post date:** [January 17, 2021, 11:45pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/16 "2021-01-17T23:45:08Z")
Did you ever try the 2:1 quick steer? If so, how did it turn out? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [January 18, 2021, 3:23am UTC](https://community.electricforum.com/t/gem-ez-steer/4742/17 "2021-01-18T03:23:31Z")
Yes work well. If you do make sure you address all the safety related aspects. ---
**Author:** ![Spibill](https://avatars.discourse-cdn.com/v4/letter/s/94ad74/32.png) [@Spibill](https://community.electricforum.com/u/Spibill)\ **Post date:** [January 18, 2021, 3:44am UTC](https://community.electricforum.com/t/gem-ez-steer/4742/18 "2021-01-18T03:44:26Z")
The 2:1 in reverse is what I use today, even though I also went lithium that allowed me to remove the two batteries up front. The only issue I had was finding it hard to get the steering shaft to a-line since both the steering box and steering wheel bracket were difficult to move for proper a-linement, I just had to allow flexibility ( loose fit)at the joint of the 2:1 unit. The extra wheel turns don’t seem to be a problem. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [January 18, 2021, 11:08pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/19 "2021-01-18T23:08:07Z")
My units have custom brackets. All movable joints are welded and roll pined for safety. ---
**Author:** ![jblove27](https://avatars.discourse-cdn.com/v4/letter/j/13edae/32.png) [@jblove27](https://community.electricforum.com/u/jblove27)\ **Post date:** [August 26, 2022, 4:34pm UTC](https://community.electricforum.com/t/gem-ez-steer/4742/20 "2022-08-26T16:34:08Z")
Hi Rodney, Are you still making these conversion kits. I have a 2022 four seater. [Next page](https://community.electricforum.com/t/gem-ez-steer/4742.md?page=2)