# Gem e825 changing tire/rim size

**URL:** <https://community.electricforum.com/t/gem-e825-changing-tire-rim-size/19543>\
**Category:** Uncategorized\
**Created:** [August 3, 2020, 11:23am UTC](https://community.electricforum.com/t/gem-e825-changing-tire-rim-size/19543 "2020-08-03T11:23:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bitty](https://avatars.discourse-cdn.com/v4/letter/b/d6d6ee/32.png) [@Bitty](https://community.electricforum.com/u/Bitty)\
**Post date:** [August 3, 2020, 11:23am UTC](https://community.electricforum.com/t/gem-e825-changing-tire-rim-size/19543/1 "2020-08-03T11:23:11Z")

</div>

I currently have stock 10” wheels, and am looking into Putting 12” wheels on it.  
Will I have to worry about it rubbing the rear fenders,? there does not seem to be much clearance.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [August 3, 2020, 5:30pm UTC](https://community.electricforum.com/t/gem-e825-changing-tire-rim-size/19543/2 "2020-08-03T17:30:18Z")

</div>

Rim size doesn’t mean anything. Outside diameter of the tire, Tire width, and rim offset are the important factors. usually if you stay at 21 or 22 inches in diameter your ok.

---

<div class="post-metadata">

**Author:** ![Bitty](https://avatars.discourse-cdn.com/v4/letter/b/d6d6ee/32.png) [@Bitty](https://community.electricforum.com/u/Bitty)\
**Post date:** [August 4, 2020, 11:21am UTC](https://community.electricforum.com/t/gem-e825-changing-tire-rim-size/19543/3 "2020-08-04T11:21:33Z")

</div>

Are the bolt patterns the same as a golf cart wheel?

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [August 4, 2020, 1:29pm UTC](https://community.electricforum.com/t/gem-e825-changing-tire-rim-size/19543/4 "2020-08-04T13:29:20Z")

</div>

An e825 is a 4 x 4" pattern, 0 offset. Some 4 x 100mm rims will fit, some won’t.

Newer model 4-bolt hub gems seem to have better luck with the 4 x 100 pattern.
