# Gem e2

**URL:** https://community.electricforum.com/t/gem-e2/4196
**Category:** GEM Forum
**Created:** [April 20, 2014, 2:02pm UTC](https://community.electricforum.com/t/gem-e2/4196 "2014-04-20T14:02:38Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![baron](https://avatars.discourse-cdn.com/v4/letter/b/9de0a6/32.png) [@baron](https://community.electricforum.com/u/baron)
#### Post date: [April 20, 2014, 2:02pm UTC](https://community.electricforum.com/t/gem-e2/4196/1 "2014-04-20T14:02:38Z")

</div>

Looking for advice on GEM E2

How much difference in performance will be made if a certain amount of weight is added to the e2.  
Has anyone noticed what power is lost or mileage range s reduced?  
If 500 lb is added?

Another question has anyone added additional batteries to an e2 or made adjustments to the engine?

Any feedback would be appreciated.

---

<div class="post-metadata">

### Author: ![eSGEMColo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/esgemcolo/32/714_2.png) [@eSGEMColo](https://community.electricforum.com/u/eSGEMColo)
#### Post date: [April 25, 2014, 12:19pm UTC](https://community.electricforum.com/t/gem-e2/4196/2 "2014-04-25T12:19:24Z")

</div>

hi baron… the e2 is rated to carry 750# so you should not see any range or power loss at 500#… not sure about your question is this a load plus passenger weight… there are ways to get more power but you will lose range… with the 12v system there is a trade off… look at the Ride 4 Fun site for a larger motor…

Bob
