# Gem e2 soft door clips **URL:** \ **Category:** GEM Forum\ **Created:** [October 24, 2023, 10:28am UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094 "2023-10-24T10:28:10Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![RichardE](https://avatars.discourse-cdn.com/v4/letter/r/7c8e57/32.png) [@RichardE](https://community.electricforum.com/u/RichardE)\ **Post date:** [October 24, 2023, 10:28am UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/1 "2023-10-24T10:28:10Z")
I am looking to source two of the clips for the door hinges on a Polaris Gem e2. They look like this… ![RtEuOwEbsrKBXIu0](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/bf024f711dfd65e9165fd270b214bc4ecc18f451.jpeg) I believe that they are known as “Ball Joint Quick Disconnect” and I think the part number is 7061184. Can anyone suggest how I might obtain two of these? Thanks, Richard ---
**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\ **Post date:** [October 24, 2023, 2:12pm UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/2 "2023-10-24T14:12:07Z")
> [@RichardE](#): > > Ball Joint Quick Disconnect found something close using googles image search-by-image feature: > **[Johnson Controls SWL10A-603Y SWIVEL BALL JOINT (0809) \*](https://www.ptacsolutions.com/Johnson-Controls-SWL10A-603Y-SWIVEL-BALL-JOINT--0809-Same-as-Factory-replacement-for-SWL10A-601-_p_122831.html)** ---
**Author:** ![RichardE](https://avatars.discourse-cdn.com/v4/letter/r/7c8e57/32.png) [@RichardE](https://community.electricforum.com/u/RichardE)\ **Post date:** [October 24, 2023, 4:05pm UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/3 "2023-10-24T16:05:33Z")
Wow! That is a fantastic find. Many thanks. It’s got to be worth a try. Maybe AI isn’t all bad after all. 😉 Thanks again, Richard ---
**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\ **Post date:** [October 24, 2023, 4:26pm UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/4 "2023-10-24T16:26:02Z")
> [@RichardE](#): > > Maybe AI isn’t all bad after all. 😉 Funny you mention that because TensorFlow was one of the first quite capable LLM AI’s to be open sourced and it became quite popular. I think it has history in image search at google. I find gImage Search quite useful for these odd parts and sometimes just finding out an industry naming of a part then gets me to the actual part via a more refined search. ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [October 24, 2023, 4:46pm UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/5 "2023-10-24T16:46:33Z")
If you can figure out what thread you are working with maybe one of these will work? > **[Allstar Performance ALL54173 Allstar Performance Quick-Disconnect Rod Ends |...](https://www.summitracing.com/parts/aaf-all54173)** > > Free Shipping - Allstar Performance Quick-Disconnect Rod Ends with qualifying orders of $109. Shop Throttle Linkage Quick Coupler at Summit Racing. Here is one on Amazon based on a 5/16-24 thread. > **[Amazon.com: 2 Quick Disconnect Ball Joint Assemblies 5/16-24 : Automotive](https://www.amazon.com/Quick-Disconnect-Joint-Assembly-16-24/dp/B00BMIKEIC)** > > Quick Disconnect Ball Joint Assembly ?Key Hole? design on retaining sleeve insures positive alignment of sleeve with ball cavity Materials of construction - Body and ball are of low carbon steel, with ball studs case hardened All components except... ---
**Author:** ![RichardE](https://avatars.discourse-cdn.com/v4/letter/r/7c8e57/32.png) [@RichardE](https://community.electricforum.com/u/RichardE)\ **Post date:** [October 25, 2023, 2:31pm UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/6 "2023-10-25T14:31:39Z")
Thanks for these. > [@AssyRequired](#): > > what thread you are working with Not just that. My concern is the size of the ball that they are intended to work with. I can’t find that information. ---
**Author:** ![HogJet](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/hogjet/32/16957_2.png) [@HogJet](https://community.electricforum.com/u/HogJet)\ **Post date:** [July 30, 2025, 8:40am UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/7 "2025-07-30T08:40:21Z")
Did you have any luck? I also need a couple of these quick release connectors for my soft doors. Thank you in advance for any help ---
**Author:** ![RichardE](https://avatars.discourse-cdn.com/v4/letter/r/7c8e57/32.png) [@RichardE](https://community.electricforum.com/u/RichardE)\ **Post date:** [July 31, 2025, 11:27am UTC](https://community.electricforum.com/t/gem-e2-soft-door-clips/27094/8 "2025-07-31T11:27:57Z")
short answer - yes i was buying in the uk and used this site > **[Q Series | Online Bearings](https://onlinebearings.co.uk/product-category/bearings/ball-joints/q-series/)** but i can’t remember which one it was. i think it was one of the QI (imperial) ones but you could check if you measure the one you have. i suspect it might be a widely available part if you search for “quick release ball joint”. hope that helps,