# Gem/Delta issues **URL:** https://community.electricforum.com/t/gem-delta-issues/14748 **Category:** GEM Forum **Tags:** gem **Created:** [October 18, 2018, 7:34pm UTC](https://community.electricforum.com/t/gem-delta-issues/14748 "2018-10-18T19:34:41Z") **Posts on this page:** 2 **Page:** 1
### Author: ![quincy](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/quincy/32/3361_2.png) [@quincy](https://community.electricforum.com/u/quincy) #### Post date: [October 18, 2018, 7:34pm UTC](https://community.electricforum.com/t/gem-delta-issues/14748/1 "2018-10-18T19:34:41Z")
I have a 2001 GEM with an aftermarket Delta Q charger replacement. I removed the charger intending to check it and put it right back in so there was no need to take a picture or anything else. (goes to show you all how stupid I am). Anyway, something happened and it was almost two weeks before I could get back to it. While searching for a wiring diagram I ran across an old thread that seems to be close to my issue. Is there anyone who will take pity on an old ■■■■■ and post a schematic for an early GEM with an aftermarket DeltaQ charger so I can refresh my apparently non existent memory? You guys might be my last hope as I have been searching the net for over a week now with no positive results. Thanks in advance, for your help. Q ---
### Author: ![Alex9a](https://avatars.discourse-cdn.com/v4/letter/a/d9b06d/32.png) [@Alex9a](https://community.electricforum.com/u/Alex9a) #### Post date: [October 22, 2018, 8:24pm UTC](https://community.electricforum.com/t/gem-delta-issues/14748/2 "2018-10-22T20:24:02Z")
On GEM e2-6 2013MY … ![2018-10-22_23-22-45](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/76f01bba96e80b2405341bc49e77fd7d6d4c3155.png) white - (temperature sensor) \>\>\> orange-gray green (charger interlock) \>\>\>\> dark green black (12th awg) \>\>\>\>\> 72 GND terminal on PSDM (Ground 72v) Red (12 Awg) \>\>\>\>\> 72V terminal on PSDM (BAT+)