# Gem Cool Air Kit **URL:** \ **Category:** GEM Forum\ **Created:** [August 28, 2017, 4:26pm UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736 "2017-08-28T16:26:50Z")\ **Posts on this page:** 7\ **Page:** 3
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [June 28, 2019, 3:57am UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/41 "2019-06-28T03:57:44Z")
That works. I posted in another thread about using sentry monitor sw. It would let you graph amps versus temperature. It would be much more responsive, as it measures right at the armature mosfets. > [@2002 Loss of Power after Lithium Conversion](https://community.electricforum.com/t/2002-loss-of-power-after-lithium-conversion/16328/23): > > Not if performance is where you want it. Good job, I know what’s involved in tuning. Try this try that, then try both. After an hour, I give up.persevere Are you programming on line now with the programming port added to Gem? Try monitor function and give me a plug. I don’t know why everyone doesn’t use it for trouble shooting. Shows much more than you would expect. Switch and throttle position etc. You can even graph, I believe 3 parameters. Such as A amps versus field current. Controller… ---
**Author:** ![diymatt](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/diymatt/32/1822_2.png) [@diymatt](https://community.electricforum.com/u/diymatt)\ **Post date:** [July 16, 2019, 9:25am UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/42 "2019-07-16T09:25:11Z")
Might be fun to slide a water block in there and do some liquid cooling. I can’t seem to find any long enough. > **[Aluminum CPU Water Cooling Block Heat Sink Liquid Waterblock Cooler Convenient...](https://www.ebay.com/itm/Aluminum-CPU-Water-Cooling-Block-Heat-Sink-Liquid-Waterblock-Cooler-Convenient/202665058177?hash=item2f2fc75f81%3Am%3AmeD4OQfFt-aamatlfYcQbLg)** > > Item Type: Water Cooling Block. 1 Water Cooling Block. Easy to install and convenient to use. Material: Pure Aluminum. Processing: Vacuum Aluminum Brazing. If you do not receive our reply within 48 hours, pls. ---
**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\ **Post date:** [July 16, 2019, 3:19pm UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/43 "2019-07-16T15:19:53Z")
They make larger cooling plates. I have seen people make or buy them for their Amps used in car stereo stuff. I wouldnt think you would or should need that level of cooling. Me thinks if you have to have a water cooled controller base then somthing else may be wrong. ---
**Author:** ![diymatt](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/diymatt/32/1822_2.png) [@diymatt](https://community.electricforum.com/u/diymatt)\ **Post date:** [July 16, 2019, 3:37pm UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/44 "2019-07-16T15:37:49Z")
> [@grantwest](#): > > Me thinks if you have to have a water cooled controller base then somthing else may be wrong. Oh totally. On that same note though most people think something is wrong with **me** for driving this. 😄 ---
**Author:** ![georgevazquez](https://avatars.discourse-cdn.com/v4/letter/g/7c8e57/32.png) [@georgevazquez](https://community.electricforum.com/u/georgevazquez)\ **Post date:** [September 16, 2019, 7:56pm UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/45 "2019-09-16T19:56:39Z")
Continuing the discussion from [Gem Cool Air Kit](https://community.electricforum.com/t/gem-cool-air-kit/12736/2): where can I get one of these heat sinks, the E Bay link is outdated? ---
**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\ **Post date:** [September 16, 2019, 9:53pm UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/46 "2019-09-16T21:53:36Z")
Someone on the forum had recommended a company called heat [sinks.com](http://sinks.com). You simply measure out what size you need. Only downside is you have to drill your own holes in the sink and add some metal to hold it down no biggie for the average DIY guy/gal ---
**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\ **Post date:** [September 22, 2019, 7:02pm UTC](https://community.electricforum.com/t/gem-cool-air-kit/12736/47 "2019-09-22T19:02:49Z")
sounds like all you needed was this $2 switch. LOL > **[Tilt ball switch](https://www.adafruit.com/product/173)** > > The "poor man's" accelerometer! Tilt sensors are switches that can detect basic motion/orientation. The metal tube has a little metal ball that rolls around in it, when its ... [Previous page](https://community.electricforum.com/t/gem-cool-air-kit/12736.md?page=2)