# Gem car 2014 front axle
**URL:** https://community.electricforum.com/t/gem-car-2014-front-axle/24734
**Category:** GEM Forum
**Created:** [July 20, 2022, 10:34pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734 "2022-07-20T22:34:34Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@GD\_Debre](https://community.electricforum.com/u/GD_Debre)
#### Post date: [July 20, 2022, 10:34pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/1 "2022-07-20T22:34:35Z")
Anyone know why my front disc brake is making noise scratches loud
I Lifted the car in the wheel is a wobbling so I took it off in Titan the boat that has a pin on it but it still wobbles after I drive any idea how to tighten or no what is the issue
---
### Author:  [@grantwest](https://community.electricforum.com/u/grantwest)
#### Post date: [July 21, 2022, 12:41am UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/2 "2022-07-21T00:41:26Z")
Sounds like your Wheel bearings are shot.
If you tighten it all the way down and the wheel hubs are still wobbling then your wheel bearings are junk
---
### Author:  [@RogerThat](https://community.electricforum.com/u/RogerThat)
#### Post date: [July 21, 2022, 12:30pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/4 "2022-07-21T12:30:23Z")
For sure sounds like the wheels bearings.
---
### Author:  [@GD\_Debre](https://community.electricforum.com/u/GD_Debre)
#### Post date: [July 21, 2022, 10:30pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/5 "2022-07-21T22:30:26Z")
Once it’s tight no wobble but after driving it goes back to loose and one shell is spins fast and respond faster then the other wheel I was thinking maybe the brake is to right but what do I know Lmaooo
---
### Author:  [@GD\_Debre](https://community.electricforum.com/u/GD_Debre)
#### Post date: [July 22, 2022, 6:05pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/6 "2022-07-22T18:05:16Z")
The bearings were junk still have one problem one side of the wheel brake pads are too tight on brake discs we could be the reason
---
### Author:  [@grantwest](https://community.electricforum.com/u/grantwest)
#### Post date: [July 23, 2022, 7:34pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/7 "2022-07-23T19:34:05Z")
For Sure. If the Bering on one side is no good it will cause UN even contact with the disk brake.
Get some new bearings installed. Typically the bearing will have a number on the bearing. Get that Number and see if you can EBay or Amazon it.
---
### Author:  [@GD\_Debre](https://community.electricforum.com/u/GD_Debre)
#### Post date: [July 25, 2022, 4:43pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/8 "2022-07-25T16:43:50Z")
Is the rear side bearings the same as front??
---
### Author:  [@grantwest](https://community.electricforum.com/u/grantwest)
#### Post date: [July 25, 2022, 6:01pm UTC](https://community.electricforum.com/t/gem-car-2014-front-axle/24734/9 "2022-07-25T18:01:20Z")
Nope completely diffrent