# GEM Accelerator Pedal Assembly Needed (also RV) **URL:** \ **Category:** GEM Forum\ **Created:** [June 26, 2017, 3:50pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504 "2017-06-26T15:50:12Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\ **Post date:** [May 12, 2023, 7:42pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/28 "2023-05-12T19:42:21Z")
We do know what **8675309** is though. ---
**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\ **Post date:** [May 12, 2023, 9:24pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/29 "2023-05-12T21:24:13Z")
> [@Naetdogg](#): > > Good news everybody Polaris now sells PN:2010469 accelerator pedal that comes with a harness adapter. It will be available 11/07/2018 but cost $470 ouch. It’s a pedal part number as mentioned in a previous post from Oct 2018… Obviously we are expected to remember this or spend our time scrolling back ready every post to figure it out. 😕 ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [May 12, 2023, 10:21pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/30 "2023-05-12T22:21:59Z")
If it’s a 2008 type throttle, no longer available. That’s why we make a replacement. Ask Byron for price. If he doesn’t have one, i can build one for you. ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [May 13, 2023, 12:21pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/31 "2023-05-13T12:21:44Z")
I have some in process. Can prep one to ship Mon if needed. A few other things taking priority lately. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [May 13, 2023, 5:53pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/32 "2023-05-13T17:53:36Z")
2 refurbished ready to ship email me [rodneyadiehl@aol.com](mailto:rodneyadiehl@aol.com) ---
**Author:** ![Matt018888](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@Matt018888](https://community.electricforum.com/u/Matt018888)\ **Post date:** [February 12, 2026, 6:27pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/33 "2026-02-12T18:27:04Z")
I know this is a older thread, but I’m stuck on a issue: I need to replace a drive sol p# 050g-e4634. I have a 2008 Morgan Olsen stepvan with only 50k miles. My pedal is bad. I know for sure it’s the pedal. I have a 2007 workhorse chassis with a Navistar vt275. 6 cylinder 6.0 pretty much. All suppliers have abandoned me. Im looking for any info. I’m lost and have limited electrical knowledge, but have the skills to fab anything to make a aftermarket pedal work. I noticed you mentioned the drive sol p# 050g-e4634. What’s your experience with this pedal? Have you successfully replaced it? So far I have DriveSol / Teleflex 050G-E4634 (Original OEM) Idle APP: ~0.9% Idle RPM: ~689 WOT APP: ~102% Faults: None (when signal stable) Issue: Worn first ¼ of resistive track → instability Conclusion: This is the only pedal family the ECM fully accepts. Near-zero idle. Passive analog dual-track. Correct correlation. This defines your required voltage envelope. ❌ 2️⃣ Williams 131973 Idle APP: ~7% Idle RPM: 800–900 Fault at: ~13% Conclusion: Preloaded idle too high. ECM rejects immediately. ❌ 3️⃣ Williams 131507 Idle APP: ~9.1% Idle RPM: ~1100 Fault at: ~12% Conclusion: Even worse preload. Incorrect scaling for VT275 ECM. ❌ 4️⃣ Williams 134030 Idle APP: 0% Fault at: ~12% Conclusion: Idle scaling looked correct, but sweep ratio / channel correlation incorrect for this ECM. Different failure mode than the 7–9% idle pedals. ❌ 5️⃣ ATP / Navistar 2607117C91 Idle APP: 6.7% Fault at: ~12% Thanks in advance for any help you could provide. I can’t imagine junking this truck over a pedal. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [February 13, 2026, 6:40am UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/34 "2026-02-13T06:40:53Z")
Give use a picture. Then volt readings for both throttle tracks. Idle and wot. Most will be .5v-4v and 1v-2v. The key being one is always 1/2 of the other. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [February 13, 2026, 7:00am UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/35 "2026-02-13T07:00:20Z")
![copyImage](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/1/c/1cd9388776497d0ff6fb4678246bfdb46886fd4a.jpeg) Like this? 699-5102 ---
**Author:** ![Matt018888](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@Matt018888](https://community.electricforum.com/u/Matt018888)\ **Post date:** [February 13, 2026, 11:51am UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/36 "2026-02-13T11:51:06Z")
[https://ebay.us/m/lmXSsj](https://drivesol) mine is this one. I don’t want to pay $1100.00 for a pedal that may last a week or a year. I’m looking for a replacement. I’ll check voltage closed/WOT on both tracks today and get back to you. I see the early GEMs use the same pedal drive sol p# 050g-e4634 just a different pedal arm and mounted upside down,. Polaris at one time had a limited run replacement PN:2010469, to me it looks like a Williams controls setup. If I could get this sensor # to the Williams sales engineer they could give me the proper sensor. If Im able to find a proper replacement I’ll post this on RV forums to help others as dealers and parts suppliers have been reluctant to really help me. I have tried many sensors based on the couple suppliers that have recommend something but none have fit the bill. I’ve cleaned the inside and as of now it works… At least for testing but I don’t trust it. Here’s a pic of my pedal… ![Resize_20260213_065840_0731](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/1/0/10a27425e7c95d698fdcfe99339b85bab46f5e13.jpeg) ---
**Author:** ![Matt018888](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@Matt018888](https://community.electricforum.com/u/Matt018888)\ **Post date:** [February 13, 2026, 11:58am UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/37 "2026-02-13T11:58:52Z")
![Compress_20260213_070444_4439](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/7/0/703f6ed373cb51b757ace45ab65f910253e1c687.jpeg) This is the inside. I’m limited to 3 posts as a new member. ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [February 13, 2026, 2:33pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/39 "2026-02-13T14:33:35Z")
You can’t trust AI for everything. I wouldn’t consider the GE controller as “modern day”. The T3/T5 controllers are 20 year old tech. Throttle pedals from that era (gem car) use 2 inputs. Track 1 is a switch. Open at pedal up. Closes at initial pedal press. Track 2 is a variable resistor pad. Yes, around 2012/13(?) Gem switched to a hall pedal design and a T5 controller, but still using the same pedal inputs. @Matt018888 - You are right. I wouldn’t pay $1100 for what should be a $80 part either. That sure looks very close to what Gem cars were using for a pedal box. Even where the pedal arm rivets to the box. What does your harness plug look like? ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [February 13, 2026, 3:03pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/40 "2026-02-13T15:03:56Z")
From picture; NOT a hall type throttle, quite obviously it is a pot type. One track is 1 volt to 3.5 volt when supplied by 4.5v supply. Track on left is fs1 idle sensor. As Byron stated is looks identical to 2008 type Gem pedal. We both sell replacement pedals or pot boxes. ![Throttle pot box](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/6/4/6499a1db52b5f02981a92280ffc58640bce7e88f.jpeg) ---
**Author:** ![Pythan](https://avatars.discourse-cdn.com/v4/letter/p/ad7895/32.png) [@Pythan](https://community.electricforum.com/u/Pythan)\ **Post date:** [February 13, 2026, 3:05pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/41 "2026-02-13T15:05:32Z")
Ha ha.. you can’t trust AI for most things..Even in what I posted it changed its mind a few times. I continued the discussion with AI after I posted this and between us there were so many ideas and thoughts about what it might be. I finally said clear your memory and moved on.. ha ha.. I see so much on pedals.. I really never paid much attention since mine is a single pot.. simple is good for me.. But curiosity about this one for me is just that, a curiosity. ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [February 13, 2026, 3:11pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/42 "2026-02-13T15:11:23Z")
Interesting that when I first started doing research on these things I found my way over to RV forums looking for a replacement. At that time they were also having troubles finding a solution. Then the trail went cold. ---
**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\ **Post date:** [February 13, 2026, 3:37pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/44 "2026-02-13T15:37:42Z")
I’m looking close at @Matt018888 assembly. Perhaps my pedal arm might work as it is? I need to go dig one out. ---
**Author:** ![Matt018888](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@Matt018888](https://community.electricforum.com/u/Matt018888)\ **Post date:** [February 13, 2026, 6:17pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/46 "2026-02-13T18:17:24Z")
Pin, wire color, function, idle, 50% and WOT A, olive drab, sensor ground 0v, 0v, 0v B, pink, ignition fed, 12v, 12v, 12v D, grey, app 2 signal, 0v, 12v, 12v F, blue, app 1 signal, .04, 2.0v, 3.6v G, white/black, 5v reference, 5.0v, 5.0v, 5.0v C, E, H, I, J not used. Delphi 150 10 pin truck side. A-F B-G C-H latch side D-I E-J Plug 10pin to 6 pin harness adapter I made 6 pin plug B D C latch side G A F ![Compress_20260213_123118_8881](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/9/b/9bf6fcd3fe08f64417d715fb77471292ba534ecb.jpeg) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [February 13, 2026, 10:41pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/47 "2026-02-13T22:41:24Z")
This is the one I make. Same plug and most likely same pin-out. An error was noted in the manual, but mine is wired correctly. IIRC ![2010 Gem throttle plug](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/d/3/d36957e4413f471d7039c4557bab3f61bab0699f.jpeg) ![17710229317591054051004908988015](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/8/d/8d573f1c399984856765839327c36c4fa9bbf4c8.jpeg) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [February 13, 2026, 10:50pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/48 "2026-02-13T22:50:36Z")
This is before I cut the arm to fit Gem car. If no hurry, I can get an unmodified pedal from Byron and send it after conversion. He has extra that I need to buy from him. The cut ones are ready to ship. ![17710231249023182163006741815810](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/b/b/bb9720ba603bdac2bb023adeb04ce1f1e213c10d.jpeg) ---
**Author:** ![Matt018888](https://avatars.discourse-cdn.com/v4/letter/m/258eb7/32.png) [@Matt018888](https://community.electricforum.com/u/Matt018888)\ **Post date:** [February 13, 2026, 11:30pm UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/49 "2026-02-13T23:30:49Z")
I’ll give it a shot, but I have no ideal how to order from you. I am actually in a hurry to get this truck back on the road it’s been parked for 3 months while I’ve been searching, so I have no issues modifiying a arm. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [February 15, 2026, 5:55am UTC](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504/50 "2026-02-15T05:55:56Z")
Your oem throttle pictured is not a dual pot throttle. fyi ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/9/c/9ccfc92f8e28248a07080590ec4753aa18ab77ac.jpeg) [Previous page](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504.md?page=1) [Next page](https://community.electricforum.com/t/gem-accelerator-pedal-assembly-needed-also-rv/12504.md?page=3)