# GEM 1999-2000 wiring issue

**URL:** <https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486>\
**Category:** GEM Forum\
**Created:** [April 7, 2020, 5:24pm UTC](https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486 "2020-04-07T17:24:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tony](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tony/32/6359_2.png) [@Tony](https://community.electricforum.com/u/Tony)\
**Post date:** [April 7, 2020, 5:24pm UTC](https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486/1 "2020-04-07T17:24:13Z")

</div>

Hello,  
I have a 1999 GEM that has a short in the lighting. My right front turn signal stays on and the right indicator stays on as well. I removed all fuses and it still stays on. I removed the cover on steering and found that someone tapped off the turn signal green and red and ran wires to the signal indicator lights. I am looking for a wiring diagram.

---

<div class="post-metadata">

**Author:** ![okeyt](https://avatars.discourse-cdn.com/v4/letter/o/f9ae1b/32.png) [@okeyt](https://community.electricforum.com/u/okeyt)\
**Post date:** [April 8, 2020, 4:30pm UTC](https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486/2 "2020-04-08T16:30:01Z")

</div>

Message me with your email and I can send PDF.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 8, 2020, 4:38pm UTC](https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486/3 "2020-04-08T16:38:01Z")

</div>

Email [rodneyadiehl@aol.com](mailto:rodneyadiehl@aol.com) for diagrams.

Usually turn signal errors can be cured by replacing the turn signal assembly.  
This is a common problem.

---

<div class="post-metadata">

**Author:** ![Tony](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tony/32/6359_2.png) [@Tony](https://community.electricforum.com/u/Tony)\
**Post date:** [April 11, 2020, 6:14pm UTC](https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486/4 "2020-04-11T18:14:01Z")

</div>

I ordered a new turn signal switch, relay and wire harness. Waiting for all that to come.

---

<div class="post-metadata">

**Author:** ![Tony](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tony/32/6359_2.png) [@Tony](https://community.electricforum.com/u/Tony)\
**Post date:** [June 17, 2020, 12:44am UTC](https://community.electricforum.com/t/gem-1999-2000-wiring-issue/18486/5 "2020-06-17T00:44:44Z")

</div>

Just an update on this issue. After replacing the turn signal I still had the same issue with indicator staying on. I did find out that the DC/DC converter was in need of replacement under a safety recall. The Dealer replaces it for free! That fixed the issue.

Now I’m trying to find out why I have 8 wires in my fuse block when the manual only shows 6… I added a Stereo and a large amplifier/ subwoofer that I wanted to add to the fuse block.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2e7adba53c432a32ba8d3fc6c3d33bf9734d6c7e.jpeg)