# Gearbox input shaft **URL:** \ **Category:** GEM Forum\ **Created:** [September 27, 2015, 7:38pm UTC](https://community.electricforum.com/t/gearbox-input-shaft/5363 "2015-09-27T19:38:30Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Melvin\_Pervis\_Maui](https://avatars.discourse-cdn.com/v4/letter/m/898d66/32.png) [@Melvin\_Pervis\_Maui](https://community.electricforum.com/u/Melvin_Pervis_Maui)\ **Post date:** [September 27, 2015, 7:38pm UTC](https://community.electricforum.com/t/gearbox-input-shaft/5363/1 "2015-09-27T19:38:30Z")
Have a 02 E825 5hp motor and have a wore out splined input shaft, bushing was never replaced and a bad vibration on de-aceleration/ and a bad engagement clunk. gearbox backlash seems fine and fluid was old, but zero metal when removed. any body know where to buy one cheaper before I contact GEM ?? been looking for a ratio number but haven’t found it yet on the case… just bought this car and it seems to have never been serviced by anyone with a brain??? 👽 ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [September 28, 2015, 6:05am UTC](https://community.electricforum.com/t/gearbox-input-shaft/5363/2 "2015-09-28T06:05:23Z")
I have a take out but it will probably be noisy. $40 2002 probably has a 10.35 - 27 tooth input shaft. ---
**Author:** ![Melvin\_Pervis\_Maui](https://avatars.discourse-cdn.com/v4/letter/m/898d66/32.png) [@Melvin\_Pervis\_Maui](https://community.electricforum.com/u/Melvin_Pervis_Maui)\ **Post date:** [September 28, 2015, 3:08pm UTC](https://community.electricforum.com/t/gearbox-input-shaft/5363/3 "2015-09-28T15:08:16Z")
Do you happen to have any new ones and or a kit w/bearings and new seal?? or do you know anyone offering them? Thanks for the used one and I’ll keep that as my back up if I can’t get one?? mine has the 27 tooth gear. I found a serial number tag but does not state the ratio that I can see? probably a cross over off of that serial number?? how noisey was the one you have?? gear whine??? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [September 28, 2015, 4:36pm UTC](https://community.electricforum.com/t/gearbox-input-shaft/5363/4 "2015-09-28T16:36:59Z")
I just sold my last one to Grant West. Yep whined thats why I replaced it. I should have some replacements in about 6 weeks. ---
**Author:** ![Melvin\_Pervis\_Maui](https://avatars.discourse-cdn.com/v4/letter/m/898d66/32.png) [@Melvin\_Pervis\_Maui](https://community.electricforum.com/u/Melvin_Pervis_Maui)\ **Post date:** [September 29, 2015, 4:05pm UTC](https://community.electricforum.com/t/gearbox-input-shaft/5363/5 "2015-09-29T16:05:01Z")
Thanks, but I need to get this one going…have a Dive co. waiting on this car for their business wish I had the time to wait?? next one?? had to bite the bullet and get one from GEM:(