# FUSE #9 keeps blowing

**URL:** <https://community.electricforum.com/t/fuse-9-keeps-blowing/26342>\
**Category:** GEM Forum\
**Created:** [May 9, 2023, 2:15am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342 "2023-05-09T02:15:42Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 21, 2025, 7:13pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/81 "2025-12-21T19:13:46Z")

</div>

> [@AssyRequired](#):
>
> Yikes!!! You need to look close at all your cables again. It appears B+ is still attached/touching the Chassis!

The interesting thing is that the voltage spike on B- to chassis only happens when the PSDM switch in the ON position!

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 21, 2025, 8:12pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/82 "2025-12-21T20:12:26Z")

</div>

Interesting.

Try disconnecting your charger Red cable and see if it is still there.

Q-\> When you installed this charger, There are 4 wires on the output. Red, Black, White and Green.

What did you do with the Green wire?

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 23, 2025, 2:44am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/83 "2025-12-23T02:44:10Z")

</div>

> [@AssyRequired](#):
>
> Try disconnecting your charger Red cable and see if it is still there.
> 
> What did you do with the Green wire?

Still there with red cable disconnected.

Green wire connected to another green wire.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 23, 2025, 4:16am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/84 "2025-12-23T04:16:36Z")

</div>

K. You can see if the jump is coming from the controller.

Disconnect the POS cable and try again.

Is there anything connected to A or B on the front of the controller?

 ![PSDM acc conn line](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/5/5aadea2100bdfe2bb177e7aa0f35e52cea9aa0ed.jpeg)

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 24, 2025, 4:33pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/85 "2025-12-24T16:33:18Z")

</div>

> [@AssyRequired](#):
>
> K. You can see if the jump is coming from the controller.
> 
> Disconnect the POS cable and try again.
> 
> Is there anything connected to A or B on the front of the controller?

Don’t see anything unusual coming from controller.

Disconnected the POS from PSDM and no voltage B- to frame.

Nothing connected to A or B.

Happy Holidays to all and Merry Christmas

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 24, 2025, 5:20pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/86 "2025-12-24T17:20:42Z")

</div>

Apologies, those were horrible instructions.  
Interesting development tho. (let’s follow that)

Reconnect B+(+72V) cable to the front side (driver) of the PSDM and verify that measuring B- and Frame that phanom B+ has returned. What V do you actually get?

**PSDM**  
(One at a time) Unplug all of the harness connectors(J1 to J6) going around the perimeter of the PSDM, checking for your phantom V to disappear.

Return with your results.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 24, 2025, 6:21pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/87 "2025-12-24T18:21:57Z")

</div>

> [@AssyRequired](#):
>
> Reconnect B+(+72V) cable to the front side (driver) of the PSDM and verify that measuring B- and Frame that phanom B+ has returned. What V do you actually get?
> 
> **PSDM**  
> (One at a time) Unplug all of the harness connectors(J1 to J6) going around the perimeter of the PSDM, checking for your phantom V to disappear

When I connect the red lead from voltmeter to B- and black lead to frame -76v.

The first one I unplugged was J5 and Voltage gone. I did do all the rest J plugs and only J5 made the difference.

At the controller is where I had the sparks fly when hit with wrench the frame with hot B+ on frame.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 24, 2025, 6:37pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/88 "2025-12-24T18:37:57Z")

</div>

> [@earami](#):
>
> At the controller is where I had the sparks fly when hit with wrench the frame with hot B+ on frame.

Yep. That is understood now. The evidence at the rear cable was odd until you mentioned the sparks up front.

> J5 and Voltage gone

Interesting. J5 is controller harness. Let me see if I can track down the next move.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 24, 2025, 6:58pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/89 "2025-12-24T18:58:34Z")

</div>

88 posts from a bunch of guys complaing about something getting blown.

Whoda thunk it?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 24, 2025, 7:28pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/90 "2025-12-24T19:28:12Z")

</div>

I’m surprised it took 88 for that little light to go on.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 24, 2025, 7:34pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/91 "2025-12-24T19:34:53Z")

</div>

Sorry, i was preoccupied

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 24, 2025, 8:21pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/92 "2025-12-24T20:21:38Z")

</div>

> [@JarJarJava](#):
>
> 88 posts from a bunch of guys complaing about something getting blown.
> 
> Whoda thunk it?

Life is like a box of chocolates!

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 24, 2025, 8:37pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/93 "2025-12-24T20:37:12Z")

</div>

> [@earami](#):
>
> Life is like a box of chocolates

[![](https://i.ytimg.com/vi/AYihDAhVPko/hqdefault.jpg?sqp=-oaymwEmCOADEOgC8quKqQMa8AEB-AH-BIAC4AOKAgwIABABGGUgWChTMA8=&rs=AOn4CLDXLMGySs9SRt4R06XO6VkLYcGBKQ "Sammy Davis Jr. - The Candy Man (1972)") ](https://www.youtube.com/watch?v=AYihDAhVPko)

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [December 24, 2025, 9:50pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/94 "2025-12-24T21:50:51Z")

</div>

> [@JarJarJava](#):
>
> 88 posts from a bunch of guys complaing about something getting blown.

Surprised? Didn’t you see the ruckus Monica Lewinski caused? 😉

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 25, 2025, 12:15am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/95 "2025-12-25T00:15:04Z")

</div>

> [@dougl](#):
>
> Didn’t you see the ruckus Monica Lewinski caused? 😉

Heard it was hands off. You’re not the least bit curious?

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [January 2, 2026, 3:06pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/96 "2026-01-02T15:06:43Z")

</div>

> [@AssyRequired](#):
>
> Interesting. J5 is controller harness. Let me see if I can track down the next move.

Happy New Year. Any thoughts?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [January 2, 2026, 4:35pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/97 "2026-01-02T16:35:40Z")

</div>

Ah, Right.  
Sorry, you were drowned out by the holiday rush. Back at it.

What motor are you running in this car? Is it using the temp sensor wire that runs down to the motor? There are two sensors running down to the outboard end. A 3 wire group is the Speed sensor. and a 2 wire being the temp sensor. Unplug the 2 wire connector (if still plugged in) and measure for the stray Voltage.

More likely is the Motor Controller. It has the large 23pin connector on top. Unplug that and check for the stray Voltage.

Report back with results.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [January 2, 2026, 9:31pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/98 "2026-01-02T21:31:35Z")

</div>

> [@AssyRequired](#):
>
> Unplug the 2 wire connector (if still plugged in) and measure for the stray Voltage.
> 
> More likely is the Motor Controller. It has the large 23pin connector on top. Unplug that and check for the stray Voltage.

When unplugged the 2 wires from the motor the voltage dropped 2v more or less. Then plugged in again.  
When unplugged the 23pin harness the voltage remained around 70v.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [January 3, 2026, 3:48pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/99 "2026-01-03T15:48:20Z")

</div>

Pretty crazy. There is not too much left on J5 that could be leaking B+ to Chass.

There are 6 nuts on studs holding the controller down to the chass. Remove them and lift the controller up just high enough to slip some cardboard in between it and the chass so it doesn’t fall back down on the studs.  
Leave all wires still connected and check again.

Results?

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [January 6, 2026, 9:33pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/100 "2026-01-06T21:33:20Z")

</div>

> [@AssyRequired](#):
>
> There are 6 nuts on studs holding the controller down to the chass. Remove them and lift the controller up just high enough to slip some cardboard in between it and the chass so it doesn’t fall back down on the studs.  
> Leave all wires still connected and check again.
> 
> Results?

Still reading 78v when lifting controller off chassis.

[Previous page](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342.md?page=4)

[Next page](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342.md?page=6)
