# FUSE #9 keeps blowing

**URL:** <https://community.electricforum.com/t/fuse-9-keeps-blowing/26342>\
**Category:** GEM Forum\
**Created:** [May 9, 2023, 2:15am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342 "2023-05-09T02:15:42Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 18, 2025, 11:40pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/41 "2025-11-18T23:40:59Z")

</div>

> [@AssyRequired](#):
>
> What was rubbing on that cable? (or what was this cable rubbing on?)
> 
> Was this up under the dash? Back at the batteries?

The cable was rubbing on the frame in the back at the batteries. I guess years of vibration against the aluminum.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 19, 2025, 12:14am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/42 "2025-11-19T00:14:21Z")

</div>

Understanding what it was jumping to will help figure out what/how things fried.

Your original issue was DC Converter went out in the charger? B+ suddenly back feeding into 12v Gnd might explain it.

Let me wrap my head around how it got into your Key loop and what it did to your accessories when they tried to click on.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 19, 2025, 1:14am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/43 "2025-11-19T01:14:04Z")

</div>

> [@AssyRequired](#):
>
> The green board will then lift out. (I would like a good clear pic of the front side).

 ![IMG_9116](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/d/0/d0a90afa3d535ac89ab9913713e06bbea7e2b411.jpeg)

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 19, 2025, 2:48am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/44 "2025-11-19T02:48:17Z")

</div>

Wow. What went on with F3 !?!?!?!  
Did you know that fuse was blown?

I have that as minor Radio power. (Probably switched w/KeyON).  
If this was blown, (shorted down stream) then this should not be repeatedly blowing F9. There seems to be more going on here… Did you replace F3 with a higher amp rating?

Did you have anything plugged into Accessory connect point 1?

 ![PSDM acc conn line](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/5/5aadea2100bdfe2bb177e7aa0f35e52cea9aa0ed.jpeg)  
 ![PSDM Access Points](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d1fdca8140dd712e49ed5599bad9e61af7d15190.jpeg)

[Still looking…]

Q: → When you discovered that bad main battery cable at the back, Was it still in contact with the frame?

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 19, 2025, 3:56am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/45 "2025-11-19T03:56:12Z")

</div>

> [@AssyRequired](#):
>
> Wow. What went on with F3 !?!?!?!  
> Did you know that fuse was blown?
> 
> I have that as minor Radio power. (Probably switched w/KeyON).  
> If this was blown, (shorted down stream) then this should not be repeatedly blowing F9. There seems to be more going on here… Did you replace F3 with a higher amp rating?
> 
> Did you have anything plugged into Accessory connect point 1?

Really didn’t look into F3 but connected radio S1 like it should. I have as radio on car.

 ![IMG_9117](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/d/9/d9e2716aac6bedd2e3c1a0f5cbfabf35fd5a6bca.jpeg)

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 19, 2025, 4:03am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/46 "2025-11-19T04:03:26Z")

</div>

> [@AssyRequired](#):
>
> When you discovered that bad main battery cable at the back, Was it still in contact with the frame?

When I was going to remove PSDM, I went to back of car to disconnect the batteries that’s when noticed a black spot on aluminum frame and checked the cable. So yes it was in contact with the frame.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2025, 5:21am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/47 "2025-11-19T05:21:16Z")

</div>

> [@AssyRequired](#):
>
> Your original issue was DC Converter went out in the charger? B+ suddenly back feeding into 12v Gnd might explain it.

This is getting interesting. Any 12v component making inadvertent contact with b-, very bad with positive ground traction battery system. And something must have, or b+ contacting frame would be trivial, by itself.

First thoughts only!

A client once mixed up the two black wires when installing the dci charger.

Damaged charger, but I never thought it out. I’ll see what your thoughts are.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 19, 2025, 8:16pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/48 "2025-11-19T20:16:24Z")

</div>

> [@AssyRequired](#):
>
> Your original issue was DC Converter went out in the charger? B+ suddenly back feeding into 12v Gnd might explain

Original issue was the charge side went out. The DC/DC converter was still working. Something must have happened when installing the Charger/Converter back since there was the possibility the B+ (72v+) was touching the frame.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 19, 2025, 8:29pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/49 "2025-11-19T20:29:07Z")

</div>

K. Seeing how you had to pull all the fuses to pull the PSDM cover off,  
Did you notice that one was blown?  
Or was the black mark on the board possibly left over from a previous issue? (trying to draft up some sort of timeline)

Before putting the Cover back on, it is reccomended to put a piece of tape over the beeper to quiet it down. (The black cyl with a hole in it).

Also, make sure the screws that go through the board to the power studs are fairly tight.

It probably won’t matter, but don’t plug the radio wire on the Acc Power S1 just yet.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 20, 2025, 2:18am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/50 "2025-11-20T02:18:41Z")

</div>

Random thoughts:

Traction battery accidently grounding to frame is a nothing burger. It won’t even arc, except for some static buildup. Either pos or neg grounding, no effect. Some systems are grounded intentionally.

As this one did arc, there is another path to the frame or 12v system, somewhere. Full time or another intermittent short circuit.

@AssyRequired any ideas?

May need to start megging frame to devices.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [November 20, 2025, 11:40am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/51 "2025-11-20T11:40:53Z")

</div>

> [@Inwo](#):
>
> Damaged charger, but I never thought it out. I’ll see what your thoughts are.

[![](https://img.youtube.com/vi/t9wmWZbr_wQ/maxresdefault.jpg "Marvin Martian - Wheres the Kaboom?") ](https://www.youtube.com/watch?v=t9wmWZbr_wQ)

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 22, 2025, 6:47pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/52 "2025-11-22T18:47:22Z")

</div>

> [@AssyRequired](#):
>
> Did you notice that one was blown?  
> Or was the black mark on the board possibly left over from a previous issue? (trying to draft up some sort of timeline)
> 
> Before putting the Cover back on, it is reccomended to put a piece of tape over the beeper to quiet it down. (The black cyl with a hole in it).
> 
> Also, make sure the screws that go through the board to the power studs are fairly tight.
> 
> It probably won’t matter, but don’t plug the radio wire on the Acc Power S1 just yet.

Still blowing fuse 9 when J3 is connected and turn the key.

The radio was working when the charger went bad.

I left every disconnected on the S side and still blows fuse when J3 connected and turn the key.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 22, 2025, 6:49pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/53 "2025-11-22T18:49:43Z")

</div>

![IMG_9139](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/2/1/21c1b619b8f37a6882cb6591ba61f8e3dc25dcee.jpeg)

Must have been an arc for a bit. I do use the car regularly.

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [November 22, 2025, 11:54pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/54 "2025-11-22T23:54:07Z")

</div>

It spit molten metal at the battery so that wasn’t a long term warm-over-time event, it was a violent arc.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [November 23, 2025, 12:23am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/55 "2025-11-23T00:23:08Z")

</div>

I am about out of things to try. This really feels like an internal PSDM issue. Since there is not very much known about this box, it is very tough to repair.

Best bet is to find someone that is parting out a car and replacing your PSDM.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [November 24, 2025, 2:56pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/56 "2025-11-24T14:56:52Z")

</div>

Thanks. I’m going take the board to a local electronic shop to see they find anything! Seem to be charging

 ![IMG_9151](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/4/d/4daf494f7f39129ea7ebdc55e71a1116f7be2d9b.jpeg)

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 10, 2025, 9:50pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/57 "2025-12-10T21:50:10Z")

</div>

Thanks. I’m going take the board to a local electronic shop to see they find anything! Seem to be charging

 ![IMG_9151](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/4/d/4daf494f7f39129ea7ebdc55e71a1116f7be2d9b.jpeg)

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 10, 2025, 9:52pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/58 "2025-12-10T21:52:30Z")

</div>

Ok fellas the board is back from the shop. The outlined is yellow replace. The tech said probably a short that caused damaged. Will install and see!! Will keep you posted.

 ![IMG_9320](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/a/4/a4bf6f354ac9ecda7ca4017ae962b2c874dbf8c4.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 11, 2025, 12:03am UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/59 "2025-12-11T00:03:32Z")

</div>

Diode or burned trace? I can’t spot it.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [December 11, 2025, 4:51pm UTC](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342/60 "2025-12-11T16:51:20Z")

</div>

The picture with yellow outline is the repaired board. There is a previous picture of damaged one.

Tech might have mentioned that the resistor might have popped.

[Previous page](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342.md?page=2)

[Next page](https://community.electricforum.com/t/fuse-9-keeps-blowing/26342.md?page=4)
