# Ford Think Parts **URL:** \ **Category:** Ford NEVs\ **Created:** [April 29, 2020, 9:25pm UTC](https://community.electricforum.com/t/ford-think-parts/18642 "2020-04-29T21:25:28Z")\ **Posts on this page:** 20\ **Page:** 4
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [April 11, 2021, 12:18pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/61 "2021-04-11T12:18:53Z")
Brake shoes are Centric 111.07990 ---
**Author:** ![TheTurboDad](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/theturbodad/32/7131_2.png) [@TheTurboDad](https://community.electricforum.com/u/TheTurboDad)\ **Post date:** [April 18, 2021, 5:20pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/62 "2021-04-18T17:20:36Z")
Any one have replacement shocks? Id rather not spend the money on the coilover options on NEV as they seem expensive for what they are. ---
**Author:** ![gostbr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gostbr/32/8227_2.png) [@gostbr](https://community.electricforum.com/u/gostbr)\ **Post date:** [April 19, 2021, 12:02pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/63 "2021-04-19T12:02:47Z")
I also didn’t want to overpay, so I bought some Monroe “load-adjusting” shocks (58263) from Summit Racing and modified them to fit the factory THiNK coils. Total cost was approx $150 for all four. I transferred the coil perches (what the lower half of the springs rest on) and the lower sleeve/ bushings (what the lower bolt goes through) from the old shocks. I then cut the bottom of old coils to approx 9” (the spring perch on these shocks sit higher than the originals) & I ground the bottom of the them somewhat flat for them to seat on the perch and added a wider bushing for them to rest on. The wider-bushings I bought from my local Tractor Supply Store (part #22KITA152). Then installed the old springs together with the springs that came with the shocks. I used the factory spring retainer. It handles like a sports car now (with street DOT tires of course)! I’m confident there are more direct fit options out there, but I chose to use what I had bought. I hope this helps someone. ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/b275d4d67d9131c2973c04d1efe68b1f2c9ba576.jpeg) ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/0de381f4f33b19057628be0f5a78944a1cd0eefa.jpeg) ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [April 19, 2021, 12:31pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/64 "2021-04-19T12:31:25Z")
Just measure the length and go to a shock chart and find a compatible shock. That’s all NEV did. ---
**Author:** ![TheTurboDad](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/theturbodad/32/7131_2.png) [@TheTurboDad](https://community.electricforum.com/u/TheTurboDad)\ **Post date:** [April 19, 2021, 2:37pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/65 "2021-04-19T14:37:23Z")
Thanks for all that detail and option. Thats a bit more work than I’m wanting to do for a shock replacement. ---
**Author:** ![TheTurboDad](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/theturbodad/32/7131_2.png) [@TheTurboDad](https://community.electricforum.com/u/TheTurboDad)\ **Post date:** [April 19, 2021, 2:37pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/66 "2021-04-19T14:37:57Z")
Thanks David. Was seeing if someone had already done that research and could share a part number. ---
**Author:** ![marcy](https://avatars.discourse-cdn.com/v4/letter/m/ec9cab/32.png) [@marcy](https://community.electricforum.com/u/marcy)\ **Post date:** [April 20, 2021, 5:00pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/67 "2021-04-20T17:00:29Z")
I am needing a windshield ? ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [April 20, 2021, 6:21pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/68 "2021-04-20T18:21:43Z")
eBay brand new $495 shipped [FORD Think Parts ,New Glass Windshield ~~~~LIMITED TIME SALE~~~~~ | eBay](https://www.ebay.com/itm/FORD-Think-Parts-New-Glass-Windshield-LIMITED-TIME-SALE/201425034431?hash=item2ee5de1cbf:g:mKEAAOSwGvhUHHOv) ---
**Author:** ![marcy](https://avatars.discourse-cdn.com/v4/letter/m/ec9cab/32.png) [@marcy](https://community.electricforum.com/u/marcy)\ **Post date:** [April 20, 2021, 7:08pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/69 "2021-04-20T19:08:11Z")
I will look there thanks ---
**Author:** ![marcy](https://avatars.discourse-cdn.com/v4/letter/m/ec9cab/32.png) [@marcy](https://community.electricforum.com/u/marcy)\ **Post date:** [May 4, 2021, 5:09pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/70 "2021-05-04T17:09:55Z")
I ordered windshield, I just received it. It came with no directions on how to install windshield, any suggestions, I did not find anything on google. Thanks ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [May 4, 2021, 7:54pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/71 "2021-05-04T19:54:26Z")
You will need to buy Auto Glass Urethane Windshield Adhesive. Watch some videos on You Tube for replacing car windshields which will guide you on how to do it. Either that or call a auto glass company and see what they would charge. Might be reasonable since you have the windshield. ---
**Author:** ![gostbr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gostbr/32/8227_2.png) [@gostbr](https://community.electricforum.com/u/gostbr)\ **Post date:** [May 4, 2021, 10:56pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/72 "2021-05-04T22:56:10Z")
The multi switch (signal/wiper/lights) on our Ford THiNK steering column comes from a late 1990’s-2002 Ford Fiesta IV/ Mazda121. ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/c/c323ed8065541dca20cb83d130bfefbef0a0b397.jpeg) ---
**Author:** ![gostbr](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gostbr/32/8227_2.png) [@gostbr](https://community.electricforum.com/u/gostbr)\ **Post date:** [May 5, 2021, 1:04am UTC](https://community.electricforum.com/t/ford-think-parts/18642/73 "2021-05-05T01:04:51Z")
The brake master cylinder for the THiNK is from a Fiat 124 (Ford and Fiat have history together). I believe the Dorman brand part number is M39134. I suspect the drum brake cylinders are from the same car, BUT I am unable to confirm. It appears most if not all Ford THiNK parts came from Ford owned European cars/market. I hope this info helps someone save money. ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/700c07677bd4b6259d97a6c3ed6ee8fe42d3cd42.jpeg) ---
**Author:** ![marcy](https://avatars.discourse-cdn.com/v4/letter/m/ec9cab/32.png) [@marcy](https://community.electricforum.com/u/marcy)\ **Post date:** [May 5, 2021, 1:28pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/74 "2021-05-05T13:28:42Z")
Thanks you for information. I did look for YouTube videos for Ford Think windshield installing I could not find any, I did find some for regular vehicles. ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [May 5, 2021, 2:57pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/75 "2021-05-05T14:57:09Z")
Yes it’s installed just like a regular vehicle. If you need the shop manual it also goes over on how to replace the windshield in the body section. Send me your email address if you need a copy. ---
**Author:** ![marcy](https://avatars.discourse-cdn.com/v4/letter/m/ec9cab/32.png) [@marcy](https://community.electricforum.com/u/marcy)\ **Post date:** [May 5, 2021, 5:14pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/76 "2021-05-05T17:14:03Z")
[marcyL1275@yahoo.com](mailto:marcyL1275@yahoo.com) Thanks ---
**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\ **Post date:** [May 5, 2021, 6:09pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/77 "2021-05-05T18:09:28Z")
Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\> ---
**Author:** ![Dana\_n](https://avatars.discourse-cdn.com/v4/letter/d/f0a364/32.png) [@Dana\_n](https://community.electricforum.com/u/Dana_n)\ **Post date:** [May 11, 2021, 8:52am UTC](https://community.electricforum.com/t/ford-think-parts/18642/79 "2021-05-11T08:52:55Z")
Thank you! I need the Steering wheel hub attachment, my employees searched the entire Internet for it but couldn’t find anything suitable. ---
**Author:** ![marcy](https://avatars.discourse-cdn.com/v4/letter/m/ec9cab/32.png) [@marcy](https://community.electricforum.com/u/marcy)\ **Post date:** [May 26, 2021, 8:52pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/81 "2021-05-26T20:52:04Z")
I have another question, the place to charge the Think, when putting in my electrical cord supply, the part in the car pushes in, not sure how to get in there to push it back up?? ---
**Author:** ![Thinker56](https://avatars.discourse-cdn.com/v4/letter/t/a87d85/32.png) [@Thinker56](https://community.electricforum.com/u/Thinker56)\ **Post date:** [May 29, 2021, 3:04pm UTC](https://community.electricforum.com/t/ford-think-parts/18642/82 "2021-05-29T15:04:23Z")
I agree. Installed these 3 lights last year. They look and work great. Much brighter than the OEM’s and very easy installation. [Previous page](https://community.electricforum.com/t/ford-think-parts/18642.md?page=3) [Next page](https://community.electricforum.com/t/ford-think-parts/18642.md?page=5)