# Ford think charging

**URL:** <https://community.electricforum.com/t/ford-think-charging/30484>\
**Category:** Uncategorized\
**Created:** [June 10, 2026, 9:00pm UTC](https://community.electricforum.com/t/ford-think-charging/30484 "2026-06-10T21:00:15Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 11, 2026, 6:49am UTC](https://community.electricforum.com/t/ford-think-charging/30484/2 "2026-06-11T06:49:16Z")

</div>

> [@thewegge](#):
>
> I am running gel batteries in my ford think and have no access to 110 outlet in my condo parking lot. I charge with a converter (220 to 110) at a tesla charging station but never get a full charge (green light on delta charger).

This sounds more like your DQ charger may not be set to the proper gel profile rather than anything you are doing to provide input power to the DQ charger.

Here are directions on how to check what profile your charger is set for:  
[https://support.delta-q.com/hc/en-us/articles/360015663051-QuiQ-Series-How-to-Change-the-Algorithm-Manually](https://support.delta-q.com/hc/en-us/articles/360015663051-QuiQ-Series-How-to-Change-the-Algorithm-Manually)

Here is one of many lists of the profiles that exist, note, your charger will at most only have some of these loaded and may even have ones not listed on this sheet.  
[https://support.delta-q.com/hc/en-us/articles/360052952391-Charge-Profile-Algorithm-List](https://support.delta-q.com/hc/en-us/articles/360052952391-Charge-Profile-Algorithm-List)

What are the specs on the GEL batteries you have installed? #6 is more common GEL profile for older GEMs that have similar GEL setups (six 12v gel cells)

@David_Illingworth is the Think guru here, maybe he knows where to find a list of profiles or has some first hand advice.

Rodney’s notes on how to change profiles on the DQ QuiQ charger via the tappy-tap-tap method if needed,

> [@Delta q charger algorithm changing for gem's](https://community.electricforum.com/t/delta-q-charger-algorithm-changing-for-gems/13237):
>
> OK guys here is the way to change your setting on a GEM DELTA Q. Strongly suggest you first : disconnect the charger positive (red) wire from the terminal post and attach 4 feet of wire to it. Then securely attach 4 feet of wire to the post. This enables you to view the lights on the charger while laying on your back under the cart and make accurately timed “TAP” connections. The MOST IMPORTANT thing you have to do is get the DQ into setup mode. You have 11 seconds to get in the setup mode …

---

_[View the full topic](https://community.electricforum.com/t/ford-think-charging/30484)._
