# Ford Think ball Joints

**URL:** <https://community.electricforum.com/t/ford-think-ball-joints/1531>\
**Category:** NEV & LSV Forum\
**Created:** [December 8, 2010, 7:58pm UTC](https://community.electricforum.com/t/ford-think-ball-joints/1531 "2010-12-08T19:58:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![vwtech906](https://avatars.discourse-cdn.com/v4/letter/v/e47774/32.png) [@vwtech906](https://community.electricforum.com/u/vwtech906)\
**Post date:** [December 8, 2010, 7:58pm UTC](https://community.electricforum.com/t/ford-think-ball-joints/1531/1 "2010-12-08T19:58:54Z")

</div>

Anyone have a part number for replacement balljoints on a Ford think? The upper and lower comntrol arms are no longer available. I have pressed out the old ball joints, but cant seem to cross referance them. Next step is to ream control arms and use a larger joint I found. Any ideas before this step? maybe a Jem is the same? The new think company was no help on the older parts, claim that was a whole nother company.

---

<div class="post-metadata">

**Author:** ![LsvCarts](https://avatars.discourse-cdn.com/v4/letter/l/e79b87/32.png) [@LsvCarts](https://community.electricforum.com/u/LsvCarts)\
**Post date:** [February 1, 2011, 12:13pm UTC](https://community.electricforum.com/t/ford-think-ball-joints/1531/2 "2011-02-01T12:13:31Z")

</div>

HI, i carry the ball joints for the ford think

give me a call we have lots of ford think parts

Electric cart warehouse  
(714) 556 5661  
2957 Randolph Ave #B  
Costa Meas, CA 92626

---

<div class="post-metadata">

**Author:** ![Biigmoe](https://avatars.discourse-cdn.com/v4/letter/b/5daacb/32.png) [@Biigmoe](https://community.electricforum.com/u/Biigmoe)\
**Post date:** [August 2, 2012, 1:06pm UTC](https://community.electricforum.com/t/ford-think-ball-joints/1531/3 "2012-08-02T13:06:26Z")

</div>

[QUOTE=vwtech906;8562]Anyone have a part number for replacement balljoints on a Ford think? The upper and lower comntrol arms are no longer available. I have pressed out the old ball joints, but cant seem to cross referance them. Next step is to ream control arms and use a larger joint I found. Any ideas before this step? maybe a Jem is the same? The new think company was no help on the older parts, claim that was a whole nother company.[/QUOTE]

Hi, so not sure if you have found the right Ford Think Ball Joints that you were looking for but if you did then I hope this will help others in the future. I am not sure what the part number is for the Ford Think Ball Joint is but the place where I have found them is here:  
Go to eBay and type in this item number: 320899381237  
NEW 2002 Ford Think Neighbor Ball Joint Front or Rear 02 Think Control Arm Parts | eBay

These guys seem to have the best prices on the ford think ball joint and I am sure you can save a few more dollars if you put in your best offer on this. I did look trough their items and they did have other Ford Think Neighbor parts and accessories but since this is for the ball joints than I am not putting any other links but you can just look trough their items. What I did notice is that they have some really cheap Ez-Go 36V Golf Cart charger with the Powerwise Plug which I taught it was pretty cool as I do have an ezgo golf cart and

Hope this helps a little!

---

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [August 2, 2012, 5:49pm UTC](https://community.electricforum.com/t/ford-think-ball-joints/1531/4 "2012-08-02T17:49:16Z")

</div>

2005 and newer GEM uses the press in type ball joints. These are sold as a separate part. Can’t remember the size. There are several ATVs that use this type of ball joint as well. It will be tough to discover what diameter they are.

Daniel
