# Finding the right motor for my EV **URL:** \ **Category:** EV Small Talk\ **Created:** [July 23, 2012, 11:55am UTC](https://community.electricforum.com/t/finding-the-right-motor-for-my-ev/2624 "2012-07-23T11:55:19Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![danthedesigner](https://avatars.discourse-cdn.com/v4/letter/d/c0e974/32.png) [@danthedesigner](https://community.electricforum.com/u/danthedesigner)\ **Post date:** [July 23, 2012, 11:55am UTC](https://community.electricforum.com/t/finding-the-right-motor-for-my-ev/2624/1 "2012-07-23T11:55:19Z")
Hi, I’m working on building an slow moving high torque EV that has 24V BLDC motors on each wheel but I can’t seem to find any that come close to what I need. I’m hoping with everyones experience you might be able to help me out. Here are the specs: 350lb load on each wheel 24V Torque = At least 65Nm Power = .25HP or 180 watts Speed = 1ft per sec Tire - 10" diameter but that could change if need be. Golf cart size This could be a pancake motor or, even better, a hub motor. All of the wheels would be direct drive and use a mono shaft. If you could help me out I would be very happy 🙂 Thanks, Dan ---
**Author:** ![marin87](https://avatars.discourse-cdn.com/v4/letter/m/45deac/32.png) [@marin87](https://community.electricforum.com/u/marin87)\ **Post date:** [August 26, 2012, 7:40am UTC](https://community.electricforum.com/t/finding-the-right-motor-for-my-ev/2624/2 "2012-08-26T07:40:02Z")
Check Australasian distributors for Advanced EV DC Motor [QUOTE=danthedesigner;12305]Hi, I’m working on building an slow moving high torque EV that has 24V BLDC motors on each wheel but I can’t seem to find any that come close to what I need. I’m hoping with everyones experience you might be able to help me out. Here are the specs: 350lb load on each wheel 24V Torque = At least 65Nm Power = .25HP or 180 watts Speed = 1ft per sec Tire - 10" diameter but that could change if need be. Golf cart size This could be a pancake motor or, even better, a hub motor. All of the wheels would be direct drive and use a mono shaft. If you could help me out I would be very happy 🙂 Thanks, Dan[/QUOTE]