# ETEL 3 ph AC motor / Delta Controller

**URL:** <https://community.electricforum.com/t/etel-3-ph-ac-motor-delta-controller/2264>\
**Category:** Technical Discussions\
**Created:** [March 30, 2012, 2:45pm UTC](https://community.electricforum.com/t/etel-3-ph-ac-motor-delta-controller/2264 "2012-03-30T14:45:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![1937Dodge](https://avatars.discourse-cdn.com/v4/letter/1/67e7ee/32.png) [@1937Dodge](https://community.electricforum.com/u/1937Dodge)\
**Post date:** [March 30, 2012, 2:45pm UTC](https://community.electricforum.com/t/etel-3-ph-ac-motor-delta-controller/2264/1 "2012-03-30T14:45:28Z")

</div>

Hi EVers,

I am using 4 ETEL tma PM high torque motors with a Delta C2000 Controller. The power wires are hooked up easily. I can’t find where to connect motor wires 5 and 6 for temp, to the controller.

Any help or suggestions greatly appreciated. Are there problems I should be anticipating with this combo?

Thanks,

Tim