# Error 11

**URL:** <https://community.electricforum.com/t/error-11/2779>\
**Category:** NEV & LSV Forum\
**Created:** [October 22, 2012, 8:38am UTC](https://community.electricforum.com/t/error-11/2779 "2012-10-22T08:38:49Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![chuckb24](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@chuckb24](https://community.electricforum.com/u/chuckb24)\
**Post date:** [October 22, 2012, 8:38am UTC](https://community.electricforum.com/t/error-11/2779/1 "2012-10-22T08:38:49Z")

</div>

Hello I am getting error 11 while driving?? all I have to do is let off the accelerator & go again?? does the pedal need cleaned?? a new pot maybe?? any ideas?? THANKS IN ADVANCE chuck

---

<div class="post-metadata">

**Author:** ![LuvMyTJ](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/luvmytj/32/537_2.png) [@LuvMyTJ](https://community.electricforum.com/u/LuvMyTJ)\
**Post date:** [October 22, 2012, 2:56pm UTC](https://community.electricforum.com/t/error-11/2779/2 "2012-10-22T14:56:47Z")

</div>

Here is code 11- [B]accelerator pedal stuck safety lock out. Check for debris or floor mat lodged under pedal.[/B]

Here is a complete list - [http://www.electricforum.com/cars/neighborhood-electric-vehicles-hev/2486-complete-list-gem-error-codes.html](http://www.electricforum.com/cars/neighborhood-electric-vehicles-hev/2486-complete-list-gem-error-codes.html)

---

<div class="post-metadata">

**Author:** ![chuckb24](https://avatars.discourse-cdn.com/v4/letter/c/df788c/32.png) [@chuckb24](https://community.electricforum.com/u/chuckb24)\
**Post date:** [October 26, 2012, 10:48pm UTC](https://community.electricforum.com/t/error-11/2779/3 "2012-10-26T22:48:43Z")

</div>

Hi & thanks BUT

I can be going 22MPH & it just kicks out???(shows code 11) let up & go again sometimes have to stop & start again???

---

<div class="post-metadata">

**Author:** ![LuvMyTJ](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/luvmytj/32/537_2.png) [@LuvMyTJ](https://community.electricforum.com/u/LuvMyTJ)\
**Post date:** [October 27, 2012, 9:03am UTC](https://community.electricforum.com/t/error-11/2779/4 "2012-10-27T09:03:36Z")

</div>

Sounds like a loose connection. I would check all the wires related to the pedal for loose connections or damaged wires.

---

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [October 29, 2012, 12:44pm UTC](https://community.electricforum.com/t/error-11/2779/5 "2012-10-29T12:44:58Z")

</div>

WARNING

Always open the big master switch or support the front wheels off the ground with jack stands before working on the throttle or its wiring. There is a danger run away.

Daniel
