# DQ remote display

**URL:** <https://community.electricforum.com/t/dq-remote-display/6442>\
**Category:** GEM Forum\
**Created:** [October 28, 2016, 5:21pm UTC](https://community.electricforum.com/t/dq-remote-display/6442 "2016-10-28T17:21:17Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 19, 2016, 1:57pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/41 "2016-11-19T13:57:59Z")

</div>

Now I will install the remote LED in the dash some where

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 2:08pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/42 "2016-11-19T14:08:54Z")

</div>

What’s the verdict?

Is one led enough?  
Will others be ok opening the charger?

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 19, 2016, 3:29pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/43 "2016-11-19T15:29:52Z")

</div>

Well it’s very basic. It does the job. But it gives you no feed back as far as how far along your in your charge cycle you are. The green light flashes the whole time. It’s not like it flashes real fast or slow it’s pretty consistent so you have no Idea if your charger is almost done or it’s got hrs to go.  
It’s better then what I have now so I will run it

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 3:40pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/44 "2016-11-19T15:40:30Z")

</div>

I’m pretty deep into the 10 led model. I’ll try to make at least one for testing.  
Display on the left. Receiver on the right.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 3:42pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/45 "2016-11-19T15:42:31Z")

</div>

Interconnects are jst jumpers for rc battery packs, so not as bad as it looks.🆒

You still “in” ?

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 19, 2016, 5:36pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/46 "2016-11-19T17:36:16Z")

</div>

That will work

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 5:45pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/47 "2016-11-19T17:45:41Z")

</div>

By the way. I have your DQ on my car as we speak. Set it to P135/93volts  
I’ll watch it to see if it steps down.  
Then let my charger finish to P177/98volts.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 19, 2016, 5:52pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/48 "2016-11-19T17:52:38Z")

</div>

David: I can’t believe you were able to bring that charger back to life. The pros said it was dead after they worked on it.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 6:19pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/49 "2016-11-19T18:19:20Z")

</div>

It’s down to from 6 to stage 5 charging dropped from 12a to 10a.

I know them inside out now. Well mostly inside. 😃

A few more minutes, it should finish cycle.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 7:40pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/50 "2016-11-19T19:40:28Z")

</div>

Below stage one now. It is blinking on and off. Pulsing 1/2 amp on and off.

Strange, must check voltage between pulses for accuracy.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 19, 2016, 9:12pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/51 "2016-11-19T21:12:48Z")

</div>

[quote=Gwest;33629]Well it’s very basic. It does the job. But it gives you no feed back as far as how far along your in your charge cycle you are. The green light flashes the whole time. It’s not like it flashes real fast or slow it’s pretty consistent so you have no Idea if your charger is almost done or it’s got hrs to go.  
It’s better then what I have now so I will run it[/quote]

Should I make a few?  
It would be nice to recoup some of my investment in hacking.  
What would someone pay? $20  
I could do it if I made 10 or so.  
Less than that I’ll just publish the instructions.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 20, 2016, 6:24am UTC](https://community.electricforum.com/t/dq-remote-display/6442/52 "2016-11-20T06:24:58Z")

</div>

Put one more together if someone needs one.  
Per your advice, I used more pins to stabilize the plug.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 20, 2016, 8:42am UTC](https://community.electricforum.com/t/dq-remote-display/6442/53 "2016-11-20T08:42:33Z")

</div>

A small shot of hot glue or silicone will do the job and insure it doesn’t pull out

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 23, 2016, 1:18pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/54 "2016-11-23T13:18:36Z")

</div>

May be in over my head on this one.:o  
Picture of prototype.  
Column of 10 photo sensors.  
All indicators turned on with ambient.  
All turn off properly when covered.  
Problem is getting them to respond to low level yellow. 😕

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 23, 2016, 2:06pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/55 "2016-11-23T14:06:02Z")

</div>

Wow: looks good. So your saying that the yellow doesn’t have enough light output to trigger the photo switches?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 23, 2016, 2:18pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/56 "2016-11-23T14:18:59Z")

</div>

Yes, it’s tough to do.  
Having a little more success fine tuning.  
The mechanical is the challenge. Getting the holes milled properly to line up with leds.

This project is going to need a partner or just be a kit.

In any case, I have one marginal, fragile, device ready for testing.

Wire leads are short for now.  
I’ll need input on how practical it is, as built.  
Ideas on mounting both ends. TX and RX.  
Power wiring. It’s 9v battery for testing.

Are you ready to go?😃

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 23, 2016, 2:25pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/57 "2016-11-23T14:25:21Z")

</div>

I JUST finished putting my car and charger back together LOL

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 23, 2016, 2:29pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/58 "2016-11-23T14:29:24Z")

</div>

I can put it on the back burner for a while.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [November 23, 2016, 2:37pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/59 "2016-11-23T14:37:18Z")

</div>

Let me know when you get time. Can’t go forward until I get some feedback.

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [November 23, 2016, 4:06pm UTC](https://community.electricforum.com/t/dq-remote-display/6442/60 "2016-11-23T16:06:32Z")

</div>

ooo wait what am I thinking. This will not require me to take the charger out of the car and take it apart like with the Single LED that I just installed. Your creation will be a simple install send it over I will test it right away

[Previous page](https://community.electricforum.com/t/dq-remote-display/6442.md?page=2)

[Next page](https://community.electricforum.com/t/dq-remote-display/6442.md?page=4)
