# DIY honey extrator

**URL:** <https://community.electricforum.com/t/diy-honey-extrator/18380>\
**Category:** Uncategorized\
**Created:** [March 26, 2020, 11:11pm UTC](https://community.electricforum.com/t/diy-honey-extrator/18380 "2020-03-26T23:11:31Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Drew](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@Drew](https://community.electricforum.com/u/Drew)\
**Post date:** [March 26, 2020, 11:34pm UTC](https://community.electricforum.com/t/diy-honey-extrator/18380/3 "2020-03-26T23:34:48Z")

</div>

Thanks Inow, the reason is if it spins too fast at the start the wax will collapse under the weight of honey so a slow start gives it a bit a time for some honey/weight to come out of the frames and finishes faster to remove as much as possible.  
It will be 240 power. ![9-fRAME-FULL-CONTROLLER-RADIAL (3)](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/8/8e9e966333715f9a13ebdef0f0abf6fca900b09b.jpeg)  
here is a pic of a commercial 1, not sure if that’s helpful?

---

_[View the full topic](https://community.electricforum.com/t/diy-honey-extrator/18380)._