# Dana pinion **URL:** \ **Category:** GEM Forum\ **Created:** [July 15, 2014, 4:18pm UTC](https://community.electricforum.com/t/dana-pinion/4331 "2014-07-15T16:18:13Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [July 15, 2014, 4:18pm UTC](https://community.electricforum.com/t/dana-pinion/4331/1 "2014-07-15T16:18:13Z")
Need a NEW input pinion for my Dana/Spicer transmission in my1999 4 passenger. GEM assembly part # 0613 00011 DANA H12 ELECTRIC 3 1/2 HP unit. SPICER Model 012AS1002 SERIAL690564 Need part # price and source information Would also like a parts drawing. Drawings I come up with are for later model gas with 10.35 or higher gearing. ---
**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\ **Post date:** [July 23, 2014, 7:43pm UTC](https://community.electricforum.com/t/dana-pinion/4331/2 "2014-07-23T19:43:23Z")
It will be tough to find a pinion for this old trans axle. Marlon would be my first try. There are some golf cars (Club Car and Yamaha) that used the GE 11 spline setup, but none of the ratios seem close to those used on a GEM. Daniel ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [July 24, 2014, 5:28am UTC](https://community.electricforum.com/t/dana-pinion/4331/3 "2014-07-24T05:28:37Z")
Marlon tells me it is the same pinion as the 10.35 transaxle. I ordered a set of 10.35 gears today. ---
**Author:** ![bucket405](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@bucket405](https://community.electricforum.com/u/bucket405)\ **Post date:** [July 24, 2014, 6:23pm UTC](https://community.electricforum.com/t/dana-pinion/4331/4 "2014-07-24T18:23:18Z")
looking for a back fender for 2003 gem car ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [July 24, 2014, 7:17pm UTC](https://community.electricforum.com/t/dana-pinion/4331/5 "2014-07-24T19:17:17Z")
Try Ebay… ---
**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\ **Post date:** [July 25, 2014, 9:05pm UTC](https://community.electricforum.com/t/dana-pinion/4331/6 "2014-07-25T21:05:05Z")
If you order the set of both gears, they will interchange. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [August 19, 2014, 7:01pm UTC](https://community.electricforum.com/t/dana-pinion/4331/7 "2014-08-19T19:01:04Z")
Pinion was fine. Marlon sent me a set of secondary gears to convert my 8.9 to 10.35. Also installed 5hp Motor. Was still whinny. Added a dose of special additive I have been working on for a year. Happy Happy Happy. Like a different machine. ---
**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\ **Post date:** [September 30, 2014, 10:43pm UTC](https://community.electricforum.com/t/dana-pinion/4331/8 "2014-09-30T22:43:22Z")
What was the “secrete sauce” ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [October 1, 2014, 7:12am UTC](https://community.electricforum.com/t/dana-pinion/4331/9 "2014-10-01T07:12:18Z")
Gear Whine Reducer [http://www.electricforum.com/cars/general-technical-discussions/8411-anti-gear-whine.html](http://www.electricforum.com/cars/general-technical-discussions/8411-anti-gear-whine.html)