# Cv boot replacement late model

**URL:** <https://community.electricforum.com/t/cv-boot-replacement-late-model/5640>\
**Category:** GEM Forum\
**Created:** [November 29, 2015, 10:53am UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640 "2015-11-29T10:53:48Z")\
**Posts on this page:** 7\
**Page:** 2

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 8, 2016, 4:26pm UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/21 "2016-03-08T16:26:17Z")

</div>

Wouldn’t clear on mine. Even tried tiny ones.

Guess I could have made two wraps, and cinched it off the rubber.

Less than 1/8" clearance on bottom.

---

<div class="post-metadata">

**Author:** ![IssaquahWA1979](https://avatars.discourse-cdn.com/v4/letter/i/91b2a8/32.png) [@IssaquahWA1979](https://community.electricforum.com/u/IssaquahWA1979)\
**Post date:** [March 8, 2016, 10:04pm UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/22 "2016-03-08T22:04:13Z")

</div>

We used a flathead screwdriver against the tabs of the clamp and heavy needle nose pliers to roll against pensioning the clamps… I purchased a clamp tool but it was not for the type that were with the kit. It is doable…

---

<div class="post-metadata">

**Author:** ![Larry](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/larry/32/1265_2.png) [@Larry](https://community.electricforum.com/u/Larry)\
**Post date:** [January 15, 2020, 9:18pm UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/23 "2020-01-15T21:18:28Z")

</div>

I realize this is from 2015 but I’m having the same problem today. The service manual I have is copyrighted 2002, my GEM is 2008. The manual shows a clip on the outer joint BUT IT ISN’T THERE!

Do you have a SM for 2008?

Will you tell me how this issue was resolved?

I have mine off and the boots removed and now I need to put the new boots on.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [January 15, 2020, 9:53pm UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/24 "2020-01-15T21:53:13Z")

</div>

send me an email. we cant publish copy righted material on the forum [rodneyadiehl@aol.com](mailto:rodneyadiehl@aol.com)

In a message dated 1/15/2020 4:28:32 PM Eastern Standard Time, [electricforum@discoursemail.com](mailto:electricforum@discoursemail.com) writes:

---

<div class="post-metadata">

**Author:** ![Larry](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/larry/32/1265_2.png) [@Larry](https://community.electricforum.com/u/Larry)\
**Post date:** [January 15, 2020, 10:06pm UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/25 "2020-01-15T22:06:54Z")

</div>

Is that a generational difference?

My email is larryready@me. Com

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [January 16, 2020, 12:00am UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/26 "2020-01-16T00:00:52Z")

</div>

Yes later models only have clip on one end

In a message dated 1/15/2020 5:17:01 PM Eastern Standard Time, [electricforum@discoursemail.com](mailto:electricforum@discoursemail.com) writes:

---

<div class="post-metadata">

**Author:** ![Larry](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/larry/32/1265_2.png) [@Larry](https://community.electricforum.com/u/Larry)\
**Post date:** [January 16, 2020, 12:16am UTC](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640/27 "2020-01-16T00:16:37Z")

</div>

Thanks, I was driving myself crazy trying to see a clip that wasn’t there. I found the clip on the inboard end so I am good to go until the next obstacle! When I take on something for the first time I tend to feel my way through the job. I turned wrenches for money in the 1960’s and early 1970’s but that was a long time ago and there were no CV’s.

Larry Ready

[Previous page](https://community.electricforum.com/t/cv-boot-replacement-late-model/5640.md?page=1)
