# Custom Chrome Tilt Column **URL:** \ **Category:** GEM Forum\ **Created:** [July 9, 2019, 3:23am UTC](https://community.electricforum.com/t/custom-chrome-tilt-column/16515 "2019-07-09T03:23:07Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![bundcur](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@bundcur](https://community.electricforum.com/u/bundcur)\ **Post date:** [July 15, 2019, 9:56pm UTC](https://community.electricforum.com/t/custom-chrome-tilt-column/16515/7 "2019-07-15T21:56:47Z")
Here is a link to what I did to the dash to accommodate switch and gauge relocation. > [@Gem Car Dash Mod](https://community.electricforum.com/t/gem-car-dash-mod/16582): > > A few of you have asked about the dash in my Gem that was done this winter so here is a rundown of what I did when installing an Ididit 16” GM column from a 1972 Chevy. First thing I did was remove the locking door on the dash to create a somewhat flat surface. Then I took a ¼" piece of plate aluminum and cut it in a 3” u shape to match the curve of the dash and had mirror polished at a local shop. Next I cut a ½" piece of MDF ½" smaller that the U shape to give what I thou… --- _[View the full topic](https://community.electricforum.com/t/custom-chrome-tilt-column/16515)._