# Controller repair

**URL:** <https://community.electricforum.com/t/controller-repair/26897>\
**Category:** Ford NEVs\
**Created:** [September 7, 2023, 1:13am UTC](https://community.electricforum.com/t/controller-repair/26897 "2023-09-07T01:13:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![vertcnc](https://avatars.discourse-cdn.com/v4/letter/v/a183cd/32.png) [@vertcnc](https://community.electricforum.com/u/vertcnc)\
**Post date:** [September 7, 2023, 1:13am UTC](https://community.electricforum.com/t/controller-repair/26897/1 "2023-09-07T01:13:06Z")

</div>

I am in need of controller repair. Any thoughts of were i should send it. It is a D1, Would be open to exchange, Ideally of would like a D2 incase i decide to upgrade motor.

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [September 7, 2023, 3:43pm UTC](https://community.electricforum.com/t/controller-repair/26897/2 "2023-09-07T15:43:41Z")

</div>

FSIP rebuilds them. Open a business account to save a bunch of money.

---

<div class="post-metadata">

**Author:** ![vertcnc](https://avatars.discourse-cdn.com/v4/letter/v/a183cd/32.png) [@vertcnc](https://community.electricforum.com/u/vertcnc)\
**Post date:** [September 7, 2023, 4:24pm UTC](https://community.electricforum.com/t/controller-repair/26897/3 "2023-09-07T16:24:14Z")

</div>

Ok, Thanks. If will give them a try.