# Cluster appears to be dead / no power

**URL:** <https://community.electricforum.com/t/cluster-appears-to-be-dead-no-power/19536>\
**Category:** Ford NEVs\
**Created:** [August 2, 2020, 12:13am UTC](https://community.electricforum.com/t/cluster-appears-to-be-dead-no-power/19536 "2020-08-02T00:13:34Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![cij](https://avatars.discourse-cdn.com/v4/letter/c/3e96dc/32.png) [@cij](https://community.electricforum.com/u/cij)\
**Post date:** [August 2, 2020, 12:49pm UTC](https://community.electricforum.com/t/cluster-appears-to-be-dead-no-power/19536/2 "2020-08-02T12:49:44Z")

</div>

Well after going through pretty much everything and looking for a loose connection, blown fuse, etc. The problem turned out to be the lower main wire loom connector to the cluster. I have no idea why it wasn’t seated properly, but as I started putting stuff back together I heard a few electrical clicks as I clipped it in, turned the key, and bingo…Obviously I am a bit concerned as I am sure it was in previously, but for now it is working…

On another subject - removing rusted / stripped bolts is a real pain in the a$$.

---

_[View the full topic](https://community.electricforum.com/t/cluster-appears-to-be-dead-no-power/19536)._