# Charger indicator lamp is on but in low contrast

**URL:** <https://community.electricforum.com/t/charger-indicator-lamp-is-on-but-in-low-contrast/28383>\
**Category:** GEM Forum\
**Created:** [September 26, 2024, 1:56pm UTC](https://community.electricforum.com/t/charger-indicator-lamp-is-on-but-in-low-contrast/28383 "2024-09-26T13:56:29Z")\
**Posts on this page:** 3\
**Page:** 4

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [October 27, 2024, 5:42pm UTC](https://community.electricforum.com/t/charger-indicator-lamp-is-on-but-in-low-contrast/28383/61 "2024-10-27T17:42:00Z")

</div>

Do your local road laws/inspection require your turn signals to be separated and yellow?

This does not look like an original factory install. Perhaps this light was installed at your Dealer/distributor when it was imported or by a Previous Owner and this person simply wired the lights together.

Confirm how this light is wired. Look under the back of the car at those lights. From your description:

> the turn lights at the rear goes on at the same time as the brake lights when the break pedal is pressed

Sounds like you are saying:

- Red Light  
1 - Half Intensity when head lights activated  
2 - Full intensity when Brake pedal pressed.  
3 - Full intensity Flashing when Turn signal applied

- Yellow light  
2 - Full intensity when Brake pedal pressed.  
3 - Full intensity Flashing when Turn signal applied

I am guessing you want to remove function 3 from the red light, and remove function 2 from the yellow light.

---

<div class="post-metadata">

**Author:** ![Teritary](https://avatars.discourse-cdn.com/v4/letter/t/71c47a/32.png) [@Teritary](https://community.electricforum.com/u/Teritary)\
**Post date:** [November 4, 2024, 11:20am UTC](https://community.electricforum.com/t/charger-indicator-lamp-is-on-but-in-low-contrast/28383/62 "2024-11-04T11:20:28Z")

</div>

When turn signal is applied, the red light don’t goes on, it’s only when the break pedal is applied

---

<div class="post-metadata">

**Author:** ![Teritary](https://avatars.discourse-cdn.com/v4/letter/t/71c47a/32.png) [@Teritary](https://community.electricforum.com/u/Teritary)\
**Post date:** [November 4, 2024, 11:24am UTC](https://community.electricforum.com/t/charger-indicator-lamp-is-on-but-in-low-contrast/28383/63 "2024-11-04T11:24:00Z")

</div>

I have an another problem, i put the car out and when I try to accelerate there is a 82 code on the dash display  
I already changed the tachometer but i don’t test it

[Previous page](https://community.electricforum.com/t/charger-indicator-lamp-is-on-but-in-low-contrast/28383.md?page=3)
