# Charger Advice

**URL:** https://community.electricforum.com/t/charger-advice/1043
**Category:** Battery & Chargers
**Created:** [November 19, 2008, 12:00pm UTC](https://community.electricforum.com/t/charger-advice/1043 "2008-11-19T12:00:20Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Qmavam](https://avatars.discourse-cdn.com/v4/letter/q/9de0a6/32.png) [@Qmavam](https://community.electricforum.com/u/Qmavam)
#### Post date: [November 19, 2008, 12:00pm UTC](https://community.electricforum.com/t/charger-advice/1043/1 "2008-11-19T12:00:20Z")

</div>

I have my gokart working fine. I started with used junkyard batteries, Now I’m ready to invest in 4–12v deep cycle batteries, probably from Sam’s.  
I need advice on a battery charger.  
With only 4 batteries I could wire four separate 12v chargers or  
get one 48v charger.  
I have the ability to build a charger if I have the circuit. I would like a smart  
charger that treats my new batteries properly.  
Any advice?  
Thanks, Mike

I attached a picture of my gokart.

---

<div class="post-metadata">

### Author: ![frodus](https://avatars.discourse-cdn.com/v4/letter/f/e95f7d/32.png) [@frodus](https://community.electricforum.com/u/frodus)
#### Post date: [November 19, 2008, 12:44pm UTC](https://community.electricforum.com/t/charger-advice/1043/2 "2008-11-19T12:44:44Z")

</div>

How long would you need to recharge? overnight? once a week? what kind of cycle time?

I’d recomend 4 individual chargers. On applications like this that will suck amps out of the batteries quickly, batteries can go out of balance easily. 4 charges insures each one is recharged to its optimum level. I’d spend a couple hundred on 4 chargers, and make a wiring harness to plug into when you’re charging.

Series chargers don’t evenly charge batteries. Some have higher voltage than others, and some get charged before others finish.

---

<div class="post-metadata">

### Author: ![kimberly2380](https://avatars.discourse-cdn.com/v4/letter/k/34f0e0/32.png) [@kimberly2380](https://community.electricforum.com/u/kimberly2380)
#### Post date: [January 14, 2009, 9:56pm UTC](https://community.electricforum.com/t/charger-advice/1043/3 "2009-01-14T21:56:43Z")

</div>

thanks frodus…even i have this problem

---

<div class="post-metadata">

### Author: ![wayfastwhity28](https://avatars.discourse-cdn.com/v4/letter/w/ebca7d/32.png) [@wayfastwhity28](https://community.electricforum.com/u/wayfastwhity28)
#### Post date: [April 20, 2009, 9:28pm UTC](https://community.electricforum.com/t/charger-advice/1043/4 "2009-04-20T21:28:37Z")

</div>

I’m making a 48volt motorcycle and I’m going to charge it with individual chargers. Does this mean that I have to disconnect all the batteries to charge them? Because that would really suck having to do that every night…
