# Capacitor as only power source

**URL:** <https://community.electricforum.com/t/capacitor-as-only-power-source/877>\
**Category:** EV Small Talk\
**Created:** [August 2, 2008, 9:35pm UTC](https://community.electricforum.com/t/capacitor-as-only-power-source/877 "2008-08-02T21:35:08Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jebnar](https://avatars.discourse-cdn.com/v4/letter/j/96bed5/32.png) [@Jebnar](https://community.electricforum.com/u/Jebnar)\
**Post date:** [August 2, 2008, 9:35pm UTC](https://community.electricforum.com/t/capacitor-as-only-power-source/877/1 "2008-08-02T21:35:08Z")

</div>

EDIT\<\>\<\>\<\>\<\>

3000 Farad \* 54  
2.7v

…Caps/144v line…AH (RECALC)  
BCAP3000-P270-T04…54…1.13

After looking over the numbers again this week I think that the equations I was using to calculate AH were incorrect as E=1/2_C_V^2 yields only 0.164 kwhr.

Apologies for the bad math.

---

<div class="post-metadata">

**Author:** ![65vair](https://avatars.discourse-cdn.com/v4/letter/6/439d5e/32.png) [@65vair](https://community.electricforum.com/u/65vair)\
**Post date:** [August 4, 2008, 7:43pm UTC](https://community.electricforum.com/t/capacitor-as-only-power-source/877/2 "2008-08-04T19:43:14Z")

</div>

I read an article about the students at BYU that used Capacitors for the fuel source but it was good for only a 20 sec burst…

If you are right, then this would be a system to look into…

How would you recharge them.

Keith

---

<div class="post-metadata">

**Author:** ![Bombardier](https://avatars.discourse-cdn.com/v4/letter/b/f07891/32.png) [@Bombardier](https://community.electricforum.com/u/Bombardier)\
**Post date:** [October 10, 2008, 4:49pm UTC](https://community.electricforum.com/t/capacitor-as-only-power-source/877/3 "2008-10-10T16:49:21Z")

</div>

HID lighting seems to draw very little current yet provides a large power source.

Is it a capacitor based system and if so could it be used to recharge the capacitors?

---

<div class="post-metadata">

**Author:** ![Engineer\_Bill](https://avatars.discourse-cdn.com/v4/letter/e/b5ac83/32.png) [@Engineer\_Bill](https://community.electricforum.com/u/Engineer_Bill)\
**Post date:** [November 1, 2008, 12:32pm UTC](https://community.electricforum.com/t/capacitor-as-only-power-source/877/4 "2008-11-01T12:32:03Z")

</div>

I’ve looked at the major ultracapacitor companies, so far I’ve only seen 5000F at 3.9 volt or 90volt at 250F. Since a farad come out to be about an amp/sec. even 10 of them, (and they are around a cubic foot for that voltage). Barely makes 6 amp hours, and the voltage is dropping the entire time. I havent looked at the cost lately, but other than to store regeneration, I dont see powering an entire car with it. They are improving all the time maybe soon someone will have a breakthrough. P.S. I’m talking confirmed delivery dates of less than 30 days, not empty promises.

---

<div class="post-metadata">

**Author:** ![drdhdmd](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@drdhdmd](https://community.electricforum.com/u/drdhdmd)\
**Post date:** [July 16, 2010, 6:58am UTC](https://community.electricforum.com/t/capacitor-as-only-power-source/877/5 "2010-07-16T06:58:10Z")

</div>

[QUOTE=65vair;4413]I read an article about the students at BYU that used Capacitors for the fuel source but it was good for only a 20 sec burst…

If you are right, then this would be a system to look into…

How would you recharge them.

Keith[/QUOTE]

20 Seconds sound great for drag racing.

Can you send me a link to that article.
