# Camber

**URL:** https://community.electricforum.com/t/camber/5164
**Category:** GEM Forum
**Created:** [July 27, 2015, 9:02am UTC](https://community.electricforum.com/t/camber/5164 "2015-07-27T09:02:38Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![inspectorudy](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inspectorudy/32/540_2.png) [@inspectorudy](https://community.electricforum.com/u/inspectorudy)
#### Post date: [July 27, 2015, 9:02am UTC](https://community.electricforum.com/t/camber/5164/1 "2015-07-27T09:02:38Z")

</div>

I put the new R4fun wheels and tires on my E2 and it changed the camber. Does anyone know how to reset it?

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [July 27, 2015, 10:21am UTC](https://community.electricforum.com/t/camber/5164/2 "2015-07-27T10:21:40Z")

</div>

Rudy

1. Check your toe. Toe out creates a lot of negative camber. I set my toe to 1/16 to 1/8 toe in.

2 If your toe is ok make sure your shock bushings are good. ( I have them on Ebay)

3 If your ok on the above loosen up the brake assemblies and insert enough washers on the top 2 bolts between the spindle housing and the carrier to straighten them up.

Really not a big deal.

Rodney