# Buzzer

**URL:** <https://community.electricforum.com/t/buzzer/4914>\
**Category:** GEM Forum\
**Created:** [April 21, 2015, 2:01pm UTC](https://community.electricforum.com/t/buzzer/4914 "2015-04-21T14:01:20Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 21, 2015, 2:01pm UTC](https://community.electricforum.com/t/buzzer/4914/1 "2015-04-21T14:01:20Z")

</div>

My parking brake buzzer doesn’t sound. It works in reverse. Ideas/reason?

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [April 22, 2015, 12:25pm UTC](https://community.electricforum.com/t/buzzer/4914/2 "2015-04-22T12:25:48Z")

</div>

hi  
are this on Gem 2005-up ?  
did brake lamp go on and off then relase park brake ?

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 22, 2015, 1:25pm UTC](https://community.electricforum.com/t/buzzer/4914/3 "2015-04-22T13:25:15Z")

</div>

No 1999 4 seater.

---

<div class="post-metadata">

**Author:** ![arandall](https://avatars.discourse-cdn.com/v4/letter/a/59ef9b/32.png) [@arandall](https://community.electricforum.com/u/arandall)\
**Post date:** [April 24, 2015, 7:07am UTC](https://community.electricforum.com/t/buzzer/4914/4 "2015-04-24T07:07:50Z")

</div>

I THINK the earlier GEMs had only a two wire circuit for the ebrake. JAT but any chance ebrake switch has [U]both[/U] NO (normally open) and NC (normally closed) contacts w/ center neutral (i.e. 3 lugs) AND you got the wiring “switched” to the wrong lug? Maybe if you replaced the switch or had the wiring off for some reason?

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [April 24, 2015, 7:47am UTC](https://community.electricforum.com/t/buzzer/4914/5 "2015-04-24T07:47:20Z")

</div>

It fixed it self. Will wonders never cease.
