# Backup beeper on a 2008 Gem e4 needs disconnected **URL:** \ **Category:** Uncategorized\ **Created:** [November 28, 2020, 3:18pm UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333 "2020-11-28T15:18:17Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [November 28, 2020, 3:18pm UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/1 "2020-11-28T15:18:17Z")
I want to disconnect the back up beeper on my 2008 Gem e4. I’ve read some of the post and none seem to be for my car. My controller #10 pin is white not blue or light green. I still cut it to check and it still beeps.The beeper on the left side of the dash is not making any noise so I know that’s not it. The beeper seems to be built into the module under the dash. Any ideas. This thing is driving me nuts… ---
**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\ **Post date:** [November 29, 2020, 9:17am UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/2 "2020-11-29T09:17:40Z")
hi there is no white cable on controller maybe you cut wrong cable ? there is white cable on dc/dc converter dont cut that ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [December 1, 2020, 3:02pm UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/3 "2020-12-01T15:02:41Z")
I’ll double check and send a photo of what I cut. The wire I cut runs from the controller through the dash to a module. In that module is where the sound is coming from ---
**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\ **Post date:** [December 1, 2020, 5:02pm UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/4 "2020-12-01T17:02:29Z")
hi look for blue/green cable on pin 10 ![reverse signal cable blue green pin 10](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6ffb6069e42ea6bbd36319c624147697ba13cf91.jpeg) ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [December 5, 2020, 1:35pm UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/5 "2020-12-05T13:35:11Z")
Thanks. I have to get a friend over to distinguish the wire color. i’ll let you know. ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [December 6, 2020, 12:54pm UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/6 "2020-12-06T12:54:36Z")
Thanks for your help. I cut the wire and bo more back alarm. So frustrating when it would come on, especially in the earlier mornings. I really appreciate this forum and the people who give out good information… Now if I could just figure out why my tool light , turtle light and forward/reverse indicators are blinking after I changed 2 batteries… It didn’t come on the lat time I changed 2 batteries… ---
**Author:** ![Red1](https://avatars.discourse-cdn.com/v4/letter/r/4af34b/32.png) [@Red1](https://community.electricforum.com/u/Red1)\ **Post date:** [December 17, 2020, 1:55am UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/7 "2020-12-17T01:55:12Z")
Gents, Could not agree more, that back up beeping is so annoying. I have an 06 E4, can you pls let me know what wire I would cut for my model year. Appreciate the advice and Merry Christmas. ---
**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\ **Post date:** [December 19, 2020, 3:24am UTC](https://community.electricforum.com/t/backup-beeper-on-a-2008-gem-e4-needs-disconnected/20333/8 "2020-12-19T03:24:20Z")
As posted above, should be pin 10 on your controller.