# Assistance w/ GEM Doors

**URL:** <https://community.electricforum.com/t/assistance-w-gem-doors/19600>\
**Category:** GEM Forum\
**Created:** [August 10, 2020, 4:01pm UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600 "2020-08-10T16:01:24Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Michael1](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@Michael1](https://community.electricforum.com/u/Michael1)\
**Post date:** [August 10, 2020, 4:01pm UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/1 "2020-08-10T16:01:24Z")

</div>

2018 GEM Polaris

Happy Monday Everyone,

Any instructions or assistance available with removing the Polaris GEM Hard doors please?

Thanks

MG

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [August 11, 2020, 1:46am UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/2 "2020-08-11T01:46:21Z")

</div>

The doors on you car are so easy to remove.

Take the pin out on the “door strap” And then simply lift up on the door and it will slide UP and come right off.

---

<div class="post-metadata">

**Author:** ![Michael1](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@Michael1](https://community.electricforum.com/u/Michael1)\
**Post date:** [August 11, 2020, 2:23am UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/3 "2020-08-11T02:23:12Z")

</div>

Oh very cool, I was over thinking like a bedroom door hinge. Thanks Grant!

Michael

---

<div class="post-metadata">

**Author:** ![Mustang2020](https://avatars.discourse-cdn.com/v4/letter/m/4af34b/32.png) [@Mustang2020](https://community.electricforum.com/u/Mustang2020)\
**Post date:** [August 12, 2020, 1:15am UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/4 "2020-08-12T01:15:30Z")

</div>

The doors unbolt from roll cage frame hinge and a hinge bracket is removed from within the frame.

---

<div class="post-metadata">

**Author:** ![Michael1](https://avatars.discourse-cdn.com/v4/letter/m/eada6e/32.png) [@Michael1](https://community.electricforum.com/u/Michael1)\
**Post date:** [August 14, 2020, 4:05am UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/5 "2020-08-14T04:05:14Z")

</div>

Yes was easy, thanks for the quick instructions GW!

---

<div class="post-metadata">

**Author:** ![Braziliangen825](https://avatars.discourse-cdn.com/v4/letter/b/7ba0ec/32.png) [@Braziliangen825](https://community.electricforum.com/u/Braziliangen825)\
**Post date:** [September 3, 2020, 5:08pm UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/6 "2020-09-03T17:08:41Z")

</div>

I’m looking for door for my 2003 geme825 any h?

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [September 3, 2020, 5:45pm UTC](https://community.electricforum.com/t/assistance-w-gem-doors/19600/7 "2020-09-03T17:45:02Z")

</div>

I have a set of 4 hard Doors If your intrested