# Ammeter

**URL:** <https://community.electricforum.com/t/ammeter/2374>\
**Category:** Battery & Chargers\
**Created:** [April 15, 2012, 5:37pm UTC](https://community.electricforum.com/t/ammeter/2374 "2012-04-15T17:37:47Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ammeter](https://avatars.discourse-cdn.com/v4/letter/a/c57346/32.png) [@Ammeter](https://community.electricforum.com/u/Ammeter)\
**Post date:** [April 15, 2012, 5:37pm UTC](https://community.electricforum.com/t/ammeter/2374/1 "2012-04-15T17:37:47Z")

</div>

Hi everyone!

I am not building an electric car but I am planning on installing an ammeter into my car (05 Camry). I would like to monitor the current since I have a lot of accessories. I understand the basics of how to install a shunt and wire the entire setup.  
I have a specific style gauge in mind:

[4-1/2 Blue LED DC 200A Digital Current AMP Panel Meter | eBay](http://www.ebay.com/itm/4-1-2-Blue-LED-DC-200A-Digital-Current-AMP-Panel-Meter-/230420605883?pt=LH_DefaultDomain_0&hash=item35a6236bbb)

Here is the shunt

[DC 200A 75mV Current Shunt Good4 Digital Analog meter | eBay](http://www.ebay.com/itm/DC-200A-75mV-Current-Shunt-Good4-Digital-Analog-meter-/350276533351?pt=LH_DefaultDomain_0&hash=item518e1bbc67)

Now I don’t see the current, correct me if I am wrong, going over 200a while I am driving, even at full load. This of course excludes cranking. My question is though, If i install a 200a shunt, and I know the starter draws much more than that, will the shunt be like a fusible link and blow? I am hoping it will only read a max of 200a but let much more current through, or would drawing more current through a 200a shunt fry the meter and open the system?

Ahhh I love projects! Awesome site BTW! :usa2:

---

<div class="post-metadata">

**Author:** ![evnut](https://avatars.discourse-cdn.com/v4/letter/e/34f0e0/32.png) [@evnut](https://community.electricforum.com/u/evnut)\
**Post date:** [April 29, 2012, 5:36pm UTC](https://community.electricforum.com/t/ammeter/2374/2 "2012-04-29T17:36:13Z")

</div>

[QUOTE=Ammeter;11482]Hi everyone!

I am not building an electric car but I am planning on installing an ammeter into my car (05 Camry). I would like to monitor the current since I have a lot of accessories. I understand the basics of how to install a shunt and wire the entire setup.  
I have a specific style gauge in mind:

[4-1/2 Blue LED DC 200A Digital Current AMP Panel Meter | eBay](http://www.ebay.com/itm/4-1-2-Blue-LED-DC-200A-Digital-Current-AMP-Panel-Meter-/230420605883?pt=LH_DefaultDomain_0&hash=item35a6236bbb)

Here is the shunt

[DC 200A 75mV Current Shunt Good4 Digital Analog meter | eBay](http://www.ebay.com/itm/DC-200A-75mV-Current-Shunt-Good4-Digital-Analog-meter-/350276533351?pt=LH_DefaultDomain_0&hash=item518e1bbc67)

Now I don’t see the current, correct me if I am wrong, going over 200a while I am driving, even at full load. This of course excludes cranking. My question is though, If i install a 200a shunt, and I know the starter draws much more than that, will the shunt be like a fusible link and blow? I am hoping it will only read a max of 200a but let much more current through, or would drawing more current through a 200a shunt fry the meter and open the system?

Ahhh I love projects! Awesome site BTW! :usa2:[/QUOTE]

Thats a easy question to ask with a question. Would you install a 3 amp fuse in a 10 amp circuit?
