# Alignment confusion

**URL:** <https://community.electricforum.com/t/alignment-confusion/22653>\
**Category:** GEM Forum\
**Created:** [October 14, 2021, 11:59pm UTC](https://community.electricforum.com/t/alignment-confusion/22653 "2021-10-14T23:59:47Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [October 26, 2021, 11:55pm UTC](https://community.electricforum.com/t/alignment-confusion/22653/22 "2021-10-26T23:55:44Z")

</div>

See if you can also get some pics of under the back of the car.  
Where that hitch ties into, and the axle that goes across.

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [October 27, 2021, 2:55am UTC](https://community.electricforum.com/t/alignment-confusion/22653/23 "2021-10-27T02:55:42Z")

</div>

according to this it has independent trailing arm rear suspension…

[![](https://img.youtube.com/vi/we21oEmT-n4/maxresdefault.jpg "The 2016 Polaris GEM e4 - GEM: Global Electric Motorcar") ](https://www.youtube.com/watch?v=we21oEmT-n4)

Still, if the back bumper is bent and there’s a hitch attached the frame back there could have been compromised.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [October 27, 2021, 5:53am UTC](https://community.electricforum.com/t/alignment-confusion/22653/24 "2021-10-27T05:53:52Z")

</div>

With IRS trailing arms, I doubt a hit would affect both rear wheels the same way.

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [October 27, 2021, 8:36pm UTC](https://community.electricforum.com/t/alignment-confusion/22653/25 "2021-10-27T20:36:41Z")

</div>

Unless that bump and/or trailer hitch attached to the center of the frame structure both arms are mounted and pivot from… Not rocket science so looking at the frame and stuff to see if anything is bent should quickly eliminate or prove a structural issue. Otherwise it’s over weight and/or sagging rear springs.

[Previous page](https://community.electricforum.com/t/alignment-confusion/22653.md?page=1)
