# ADC motors?

**URL:** https://community.electricforum.com/t/adc-motors/499
**Category:** Do It Yourself (DIY)
**Created:** [December 25, 2007, 2:44pm UTC](https://community.electricforum.com/t/adc-motors/499 "2007-12-25T14:44:32Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![4x4\_Welder](https://avatars.discourse-cdn.com/v4/letter/4/ccd318/32.png) [@4x4\_Welder](https://community.electricforum.com/u/4x4_Welder)
#### Post date: [December 25, 2007, 2:44pm UTC](https://community.electricforum.com/t/adc-motors/499/1 "2007-12-25T14:44:32Z")

</div>

Their site is down, so I can’t get a quick answer to my question-  
Basically, all I was wondering is if the 9.1" motor can be had with dual output shafts, or if it only has the single drive end.  
Anybody have a picture of one, or use one currently?

---

<div class="post-metadata">

### Author: ![Houseoffubar](https://avatars.discourse-cdn.com/v4/letter/h/9de0a6/32.png) [@Houseoffubar](https://community.electricforum.com/u/Houseoffubar)
#### Post date: [December 26, 2007, 2:32am UTC](https://community.electricforum.com/t/adc-motors/499/2 "2007-12-26T02:32:10Z")

</div>

Absolutely, ADC offers this motor with one or two shaft ends. Check out EV parts under street then motors [http://www.evparts.com/firstpage.php](http://www.evparts.com/firstpage.php)